Unified Computing System Discussions

Hi,I'm having trouble getting this new BIOS policy feature "Resume AC on Power Loss" to work. I've tried both on v1.3(1c) as well as v1.3(1n) but to no avail.After creating the BIOS policy with "Resume AC on Power Loss" set to "reset" (I've even trie...

AllI am attempting to install Citrix Xen server (tried 5.6 and 5.5) on a UCS-B series blade running the Palo Adapter.During the install we are asked to install drivers.I used "kmod-enic-xen-1.1.1j-0.x86_64.rpm" from virtual media and it stated no dri...

We have a Cisco UCS C 250 M2 Server which is already fittedwith 146GB 6Gb SAS 10K RPM SFF HDD/hot plug/drive sled mounted, we need morehard disk space in the server.Can I buy Qty.05 300-GB SAS; 6G, 10,000 RPM for the sameserver or it has to 146-GB SA...

Can a 6100 be used today like a 5000 to support Unified IO for UCS-C servers with CNA adapters?  I would rather order a 6100 today in anticipation of UCS-C support but would like to at least implement Unified I/O on it now.  Or am I stuck waiting or ...

Hi all,I ordered rackmount server(C210 M1) with Broadcom NetXtreme II 57711 which I would like to connect to Cisco UCS 6120 in switching mode, but I can't make it working. Broadcom has 2 slots for SFP/SFP+ so I inserted Cisco SFP 10GBase-SR into it. ...

Hi,Is there a way to configure the UCS blades to boot up upon power on (assuming each blade already has a service profile associated)?THanks.

I have created a Service Profile with the Local Disk Configuration Policy set to the default value. All went ok until I wanted to associate a different profile, now with RAID1 as the policy for the local disks. Here I got a misconfiguration error. Ap...

RHEL 5.5 x64 and UCS C200 M2 server.Trying to do the BIOS update from the OS, and getting the bellow error.# ./iflash32 -ni -u ./C200-BIOS-1-2-1a-0.cap iFlash32 Ver 1.1 Build 3Copyright (C) 2009 Cisco Systems Inc.*ERROR* Unable to find necessary BIOS...

I have one Cisco UCS C200 M2 rack mount server with Qlogic CNA installed. I have removed Qlogic CNA and inserted Emulex LPe11002 HBA, connected the HBA to the fabric, and assigned one LUN with single-path to the UCS server. The installed OS is RHEL5....

Since Windows 2008 is a couple years old, it doesn't have a built in raid controller driver for UCS C200M1 servers.  Windows did not discover the RAID controller in the server, and none of the drivers I've downloaded from Cisco appear to be correct. ...

Hi Team,Do we have a UCS c-series solution to support Serial Attached SCSI (SAS) HBAHP or anything like this?Sample is from third party: SC08Ge Host Bus AdapterReference:http://h18000.www1.hp.com/products/servers/proliantstorage/adapters/sc08ge/index...

Hi AllI have just installed a pair of UCS C210 M1 servers for Unified Communications Manager, however one of the servers is very noisy and does not seem to want to quiet down, the other server is fine, I have checked inside and all fans are running a...