Hi, I am working with this server that has installed in the mLOM slot this module: https://www.cisco.com/c/en/us/products/interfaces-modules/ucs-virtual-interface-card-1227/index.html the appliance I am trying to install only works with eth0 and 1i...
Forum Posts
I've got a weird issue with both of my C220 M5SX servers. I powered down my complete home lab to physically move/roll the rack 10metres across the room to a better spot, and now they are failing to power on/post. They are UCS managed and hooked direc...
Hi experts, I've been trying to determine some space allocations on a HyperFlex cluster via an ssh session to a Storage Controller VM. I've discovered that I can turn off the HyperFlex cleaner with the command stcli cleaner stop And I can start it ag...
Just looking for a little validation. Have a customer that deployed their environment using 4 x 10GbE connection as 4 separate uplinks versus creating a port-channel with the 4 interfaces. Is it possible to non-disruptively configure them in a port...
Hello,is anyone using redfish with this server model?I'm trying to deploy openshift bare metal IPI, it uses redfish to inspect the HW and it is not able to get the Ethernet Interfaces, CIMC replies with a 500 error:# curl -L -k --user admin:<password...
This has been posted here to reach a wider audience. If you find the same information on my blog, that's OK - I've posted it in both places!It all become possible when in ESXi v7.0U2, VMware introduced a new parameter for VMs called snapshot.alwaysAl...
Resolved! Upgrading UCS Firmware to 4.2
Hi, As I understand it, the M3's I have across all my domains are no longer supported at this firmware level, that's fine, we don't want M3's anyway. What happens to them when the firmware is upgraded on the UCS? if they are not supported, and still ...
Resolved! CIMC Upgrade
Hello Team,I have a couple of CIMCs that require upgrade due to some bugs. Last time I upgraded CIMC was ages ago so I believe some steps might have changed. I will be glad if you can guide me on this; All CIMCs run with this codesBIOS:C240M5.4.0.2a....
Hi everyoneI wanted to know if it is possible to install Cisco EPN v5 in bare metal in a UCS c240 M5.In the EPNM guide, I read that it installs on UCS 220.Thanks .
Hello,As a title, I want to know the recommended BIOS version of UCS and how to find where that information is posted.In addition, Cisco ISE is working under the UCS Server.Information about CIMC is like this.--------------------------------------●cu...
I have a UCS domain with four FC connections on each FI6200. I need to migrate to FI6400 pair. According to the migration guide, link below, one of the pre-requistes for the migration is "Before migrating from Cisco UCS 6200 Series Fabric Interconnec...
- FYI : https://www.cisco.com/c/en/us/support/docs/field-notices/723/fn72368.html M.
Had a weird problem last night and this morning, and was curious if anyone has seen such a thing, if it might be a known quirk, or if this might be either a fluke or impending hardware failure. I've opened a TAC case, but wanted to bounce this event ...
Resolved! SSH to UCMS without password
Hi, Is it possible to log to UCSM through ssh using a private keys and bypassing the login password? I tried to configure a ssh public keys and I can enter the ssh passphrase, but UCSM is still asking for the admin password Regards,freD
I am upgrading a UCS E160S module from CIMC/BIOS Firmware Ver. 3.1 to Ver. 3.2.10 via CLI using an FTP Server. The reason for the Firmware upgrade is due to Adobe Flash no longer being supported on modern Browsers, as Adobe Flash is required in Ver ...
