Hi, I’m most of the way through rebuilding my home lab and have swapped to Cisco UCS M4 generation gear and am also using UCS manager. I’m continuing to run VMWare vSAN so tracked down the required UCSB-MRAID12G-HE controllers for my B200M4 blades. T...
I'm trying to enable SR-IOV to work with the following setup:C220M5SOnboard NIC is the Intel X550T dual port adapterESXi version 6.7u3Latest HUU applied to all firmware (shows 4.1.3c in CIMC)SR-IOV is enabled under the PCI settings in BIOSI've select...
Hey together, I searched the internet for quite some time and didn't really find what I need so I decided to ask here now. We are currently running 3 Host servers in a cluster for VMWare.Each server is connected with one power supply to a UPS and one...
Hello community,today, i receive the message from one of our Servers, that the service profile is not available. First message: Service profile ESX48 cannot be accessedSecond message: Connectivity between the CIMC and one of the FIs is down. Connecti...
Is there a Cisco UCS Platform Emulator User Guide?
I am unable to review the release note 4.0(4I) and have tried to with different browsers and etc but same result.https://software.cisco.com/download/home/283612660/type/283655658/release/4.0(4l) Can anyone try and see if it might work for you guys? t...
Does anyone know and able to confirm if HX240C-M5L with 12TB drivers (HX-HD12T7KL4KN 12TB 12G SAS 7.2K RPM LFF HDD (4K)) cluster running HXDP 4.5 & ESXi supports 9 nodes? Refer to the following Cisco guide, HX 4.5 https://www.cisco.com/c/en/us/td/doc...
1) Can I run two HXDP clusters, for example 5-node and 4-node cluster, with the same pair of HX's FI?2) Does anyone experience this kind of deployment? Any concern and issues?3) Refer to the Cisco document (Guidelines for Adding Cisco HyperFlex to an...
The internal USB and the Flexflash SD are both USB 2.0 speed. im looking for some way to use the two SATA ports under the riser 1 holding PCI slots 1-3. Has anyone installed internal 2.5 drives?
I have a remote UCS on my hands. It experienced a power hit.The system has a chassis with blade servers and 6 rackmount servers with FEXes. The blade servers are OK, but the rack servers are inaccessible. A person local to the system told me that the...
I have a UCS MINI domain with v4.0(4b) firmware, ESXi v6.7u1 and using FC via Brocade switches for SAN access. Now I have purchased new MDS switches and IBM Storwiz FS7200 to replace the existing SAN infrastructure. It should be a fairly straight for...
With firmware v4.0.x, the UCSM release note shows "Ethernet or FC switching modes", link below.https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/CiscoUCSManager-RN-4-0.html#concept_jtr_3sg_h2b From datasheet, it does show feat...
Hello,i am getting the following error during my infrastructure bundle update [FSM:FAILED]: Deploy OUI to Fabric-Interconnect(FSM:sam:dme:FcpoolOuisDeploy). Remote-Invocation-Error: SCI_GetAllOUIEntries API is not supported in running Switch Version ...
Dear All, I need to install ESXi (v6.7U3 or above) with RAID 1 or 5 or 6. I have purchased the following components: UCSC-C220-M5SXUCSC-SAS-M5 [Cisco 12G Modular SAS HBA]5x UCS-SD400G123X-EP [SAS Solid State Disks]After checking in CIMC and loading t...
Hi, Anyone upgrade Hyperflex ESXi from 6.7 to 7.0 yet ?Is there any compatibility issue ?Which upgrade method is recommended ? Budi
