I'm adding another subscriber to a CUCM 8.X cluster but the customer has misplaced the Cluster Security Password. If possible, I need to know how to recover or change the existing Cluster Security Password.
I'm adding another subscriber to a CUCM 8.X cluster but the customer has misplaced the Cluster Security Password. If possible, I need to know how to recover or change the existing Cluster Security Password.
I have disabled the TONE ON HOLD parameter in CM but still get TONE ON HOLD beeps while mobile agent is in nailed up state. My LCP cti port have MOH enabled my RCP ports do not. I need to either play MOH or disable beeps while agent is in nailed up s...
I recently upgraded to IOS 12.4(15)T3 for CME 4.1. The softkey DND has stopped working. The button has no effect if IP Phone is connected, ringing or idle. Not sure if anyone else is having this problem.
While trying to logon to a phone with extension mobility I get "login unsuccesful" "error 11" Error 11 refers to login/logout device cannot be found but the phone is registered and working and the User Device Profile is configured and associated with...
The version of Putty you maybe using does not allow for a serial connection. You can use any terminal emulation similar to ProComm or even Terminal for Windows. Otherwise the description is spot on for converting an AP from LWAPP to Autonomous. The s...
Thought I would pass this on. Under "Telephony-service" I had to add "hunt-group logout Hlog" After the command is entered you should re-create your "cnf-file" The output says that you should reset your IP Phones but I did not have to. The Dnd softke...
Thought I would pass this on. Under "Telephony-service" I had to add "hunt-group logout Hlog" After the command is entered you should re-create your "cnf-file" The output says that you should reset your IP Phones but I did not have to. The Dnd softke...