Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allwe have a problem with a 2 node UCCX 8.5 deployment.The System Parameters Configuration page in app addmin displays only a few fields that are not editable. For example we cannot view historical reporting field and others.Also an error message ...
Hi allThe question is about changing CUCM 7.X IP subnet mask.We are usign thi guide:http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/ipchange/ipchg712.html#wp41994After CUCM restart the IP subnet mask remains the same.Ideas?Kind regar...
Hi allDoes anyone have experience with the new ASA 5515-X and software version asa861-k8-smp?We are experiencing problems with NAT through some interfaces (and not through others)ASA let's you insert NAT commands (using objects) but when you issue a ...
Hi allThe issue was about Cisco ASA5510 Sec Plus.2 Interfaces, LAN and DMZ.Both 1000 FD, no interface errors like CRC or something similar.If I start a data transfer (like FTP) or a data stream test (like Netperf), from DMZ to INSIDE I get a theough...
Hi allwe have problems with IPCCX 4.0 backup and BARS 4.0.14000.The backup process starts and after a few minutes remains blocked at step"Staging Cisco Customer Response Solutions target X.X.X.X"Some ideas?See attachments.Regards
Hi Aaronsorry for the delay in my answerMaybe we have a problem with DNS configuration.At the moment we are dealing with the resolution of this problem.Thank you for now.Kind regards.
Hi Aaron From each node, ping the other by hostname only (e.g. utils network ping xfuccx02)OK!From each node, ping the other by FQDN (e.g. xfuccx02.whatever.com)NOT OK!From each node, 'utils network host x.x.x.x' where x.x.x.x is the IP of the other ...
HI Aronfirst of all, thank you.Same behavior on the alternate node.To tell the truth, something similar also happens in Cisco Unified Serviceability.MADM log in attach.Regards
Dear IwenThe issue was not about wrong configuration.Today the device is working correctly with no issues and with no changes to the original configuratio.During the weekend we have changed version asa861-k8-(1) with asa861-k8-(2) end rebooted.Kind r...
