Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Team, My objective was making calls from cucm registered sx 80 to cms space to be encrypted. For that I made cucm (10.5.2) mixed mode. All the calls between cucm registered end points are encrypted and we can see lock icon. The trunk to cms fro...
Hi,As far as I know CUCM 10.5.1.10000-7 does not require an encryption license. Also Release 10.5(2)SU6 requires an encryption license to run the product in mixed mode. But regarding CUCM 10.5.2.22900-12, it is not clearly mentioning any where. Can y...
Hi,I have a CME with 12.x and 8841 phones are registered with this CME. I would like to turn off the light. can you please advice whether it is do able.
Hi,
I have two WS-C3750G-12S core switches which are in stack. I have 5 access switches. Three of them are WS-C3750G-24PS and two of them are WS-C3850-48P which are in stack.
I have 140 cameras of American Dynamics. Some cameras connected to WS-C385...
Hi,
I have a new BE6H-M4-K9 and started to booting. When I hit F8 to do the ip address for cimc I am getting a blue screen which is asking for
enter current cimc password, enter new cimc password , re-enter new cimc password. When I entered current c...
We have CMS cluster 2.8.1 deployed using OVA (https://software.cisco.com/download/home/286309725/type/280886992/release/2.8.1) This has 16vCPU and 16 GB ram. Can we increase its vm parameters to increase more than 10 Full HD calls. Any impact if we c...
