Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi folks,We're upgrading from UCCX 7.01SR5 to UCCX 8.5.1SU3 in a virtual machine and would like to build the new virtual to test scripts and familiarize ourselves with it.Can we run the pre-upgrade tool multiple times on the 7.01 server? We'd run it...
Hi folks,I'm running into some trouble trying to add a C210M2 server into vCenter's power management configuration to monitor the hardware. I've double checked the username and password for the BMC user and ensured that IPMI was enabled on the C210....
Hello,We're planning upgrading our UCCX system from 7.01SR5 to 8.02SU3 and are also planning to virtualize UCCX on the UCS C-series platform with version 8. Since we're jumping from windows based v7 to linux based v8 can we jump straight onto the UC...
Hi,Does anyone have recommendations for setting up a H323 gateway with SRST for two tenants each with their own analog trunks? They will be sharing the CM server (which is offsite) and are on the same internal network. I was hoping to use a single ...
Hi,We've been experiencing some infrequent issues with CUE 2.3 (CME 4.1 and IOS 12.4(15)T1) where voice mail message indicators aren't being updated as soon as the message is delivered. Sometimes the message notification isn't activated until a day ...
Found the demo license. Thanks Brian!Great! Thanks for the info anchoudh! I grabbed the 8.5.1SU3 PUT tool as that's what we're moving to. We'll build out the lab box and see what happens! Cheers!Jay
Hi Padma,Thanks for your reply. We did get this to work. We had to open an ACL to allow UDP traffic on port 623 to vCenter.Found the port listings here in the VMWare KB: kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&ext...
Hi again Amit,Is the phone URL for authentication (found in CUCM Enterprise parameters) used by the TVS or in the certificates any where? The reason I ask is that we use SingleWire's InformaCast product and change the authentication URL to point to o...
