- Our Country Code on our Wireless Controller ( 5520) and on our AP is currently set to GB ( we are based in the UK and our maximum power output allowed on indoor 5.0 GHz frequency radios is 200Mw and on 2.4 GHz radios is 100Mw)- We have an AP...
I have had reports for slow/ disconnecting WiFi Clients ( smartphones ) at one of our remote sites. When testing connection on site, SNR looks ok and Signal strength looks ok ( see below output) . Connections to Wireless LAN and Cisco switch inte...
We are currently on and have been advised by TAC that we are hitting this bug in our current version System version: 12.5.1.11002-481 (su2-ES03)Please advise what WK or patch to apply for a fix for our current version
We currently have a test UCCX installed with 12.5.1.11002-481. Currently the Cisco Unified CCX engine is only in partial service. I have tried restarting the service on both GUI and command line but this does not work. I have also carried out utils...
Hi there One of my users would like to be able to change the order of her Hunt Group List on CUCMI do not want to give her administrator access. Is their documentation /guidelines with a matrix to assist me with setting minimum amount of permissions...
sorry I need to correct my post , my second question - b) how come the max power level 1 on the AP is set to 18 and not 23 if the max power level on the TPC setting on the controller is 30 DBm ( which would be illegal in this country )
thankyou for your reply. There are only ever about four or five clients e.g. smartphones and tablets in use on this site. No dedicated voice handsets so why not give the other types of priority connections the priority ? It is a utilities / indus...
we do not have clients dedicated to voice on the WLAN . The wireless client is a smartphone client , accesses a system critical application which is maybe why my colleague configured platinum when configuring . The model of AP is a C9115AXE-E8.10....
We were advised to move to ES04 but browsers are updated all the time without our control so instead we implemented the following workaround for the issue with a group policy :https://chrome.google.com/webstore/detail/disable-automatic-tab-dis/dnhn...