Voice Systems and Accessories - Small Business

I have implemented a BLF on one of the lines on a SPA504 and it works - here's the config I used: fnc=blf+sd;sub=124@$PROXY;ext=124@$PROXY;nme=124 When someone is on the phone at extension 124, the line key turns red on the phone that has the string...

Hello, I have an NTP problem with my cisco SPA 112; 1) I don't have any NTP log in syslog even in debug mode.  2) The NTP update is done only if i specified it to every 60 seconds (excessif amount of request) Anyone has encounter this problem before...

Добрый день ! Есть шлюз Cisco spa8000,он зарегистрирован у sip провайдера.Все работает хорошо,но для того что бы куда то позвонить после набора номера на аналоговом аппарате необходимо добирать #. Можно ли осуществлять звонки не набирая # в конце ном...

When attempting a remote firmware upgrade from 1.3.5(004p) to 1.4.1 I noticed the following in the syslog output: 2016-01-19T15:37:33.019424-05:00 XXXXXXXXX >>>> fprv_eval_upgrade_rule -- serv=XX.XX.XX.XX path=/SPA122.bin port=XXXXXX 2016-01-19T15:...

Can anyone has any recommendations for any US hardware suppliers?   (I'm trying to avoid games with EBay/Amazon marketplace) If you are such a firm, please feel free to contact me via P.M.    (Public Soliciting is probably a forums TOS violation) Th...

Hey Guys, There were power issues at a location today and now the uc540 does not start up fully. I connected a console cable and it looks like the startup process is in a loop. I have already tried a replacement power adapter with no difference. Im n...

using spa11 ATAs, inbound calls drop randomly (or i don't see a pattern). our provider is voip.ms. syslog around one incident of such drop is posted here and also attached to this post (g5 is logging server): https://gist.github.com/a78d260cfa443435...

We've just set up a Revolabs conference phone as a SIP endpoint an a customer's UC520 using the guide from Revolabs.  We've added the following config:- voice register globalmode cmesource-address 10.1.1.1 port 5060max-dn 1max-pool 1!voice register ...

Hello people, I've been implementing the DNS SRV feature of the SPA122. It nicely works and I am really happy about it but I would like to tweak it or at least understand how Cisco implements it. I have two servers; one being the primary and the ot...

Hello,Although it's not officially supported, it seems that the SPA232D can work with third-party DECT/GAP handsets.After setting "Handset Pairing Passwd" to 0000, I can successfully register any DECT/GAP handset.I set up a SIP profile on DECT Line 1...

I have a Cisco SPA 112. I placed the device in a ring all group. When a incoming call is answered the 2nd phone rings for 7 seconds. I updated the ATA to the synchronized ring setting on the ATA and the 2nd phone still rings. I am running firmware 1....

Hi all,I ran into a very weird issue where the ATA sent 9 digits instead of the usual 10 and the next set of calls had the missing 10th digit of the previous call prepended.My dialplan is as follow (for both FXS lines):(*xx|[34689]11S0|[2-9]xxxxxxxxx...

I have two SPA122's of the same version. Both running latest Firmware (1.4.1) I need to change the local static IP on one of the boxes (from 10.0.0.85 to 10.0.0.88) due to a revision of the VoIP VLan. Both ports on the SPA registers correct with t...

Dear forum members,  I'm having problems to configure my Linksys SPA3102 according to my needs. I have a sipdiscount.com account, a PSTN line, a SPA3102 router (just bought it) and a sip phone. Untill now I used my sip phone with the voip provider ...