Voice Systems and Accessories - Small Business

I'm currently testing my new SPA508G phone and everything seems to work fine except that the name of the caller is not displayed on incomming calls although the telephone number and name of the caller are in the Personal Directory. The phone seems to...

HelloI have a Linkxyx SPA-962 with a custom BMP background image located on a local TFTP server. The image displays correctly, but its displaying an older version of the image, that no longer exists. I have tried using a different image, and rebootin...

Good Morning, following a restoration of a backup file onto our UC540, we have a handset (SPA504) which is failing to register and displays the message:-DownloadingUser_Define_4/This handset was working perfectly well before we defaulted the UC540. T...

Curious if anyone knows if the updated timeline for release Jan 2012 will still stick this time....customers asking for new phones/features...Thanks!

Hi Guys,This happens to me from time to time and I was wondering if someone can explain why. When I try to upload my phone firmware, I download the zipfile, unzip and drag the .bin file to the UC540 icon in CCA 3.1(1). The TFTP upload begins then fai...

Hi, I have a problem with registerting and updating the firmware for the SPA303 with UC560. IOS version: Version 15.0(1)Software Pack: 8.2As I added the SPA50x-30x load files using the CCA 3.0, I only can see the SPA500 series in my UC (which all 504...

Hi All,Very new to this so treat me gently please.Just installed a UC-560 on one of our sites, internal calls are fine and everything works as it should, however external calls are suffering from poor call quality or even dropping the call entirely m...

I have about 100 spa2102 installed and some of these, after some time (from few days to a couple of month) and always the same (at differents time), they enter in a locked state. The customer with the locked ATA cannot do outbound calls, when he call...

I currently have two locations each with an ASA5505 as the edge device and currently do site-to-site vpn. I am trying to determine the best deployment for multisite support having a UC540 at both locations. I could do a routed interface from UC540 wa...

Hi,We have a UC560 with an ISDN30/E1 connection to the PSTN. We have incoming calls routed through to 8 x SPA525G2's in a blast group. I have debugged the ISDN and every thing seems to be OK there but we are dropping an awful lot of incoming calls. G...

Hey all,Just setting up the first phone for the company VoIP system that is about to be implemented, have tweaked all the settings that I want and have got the phone working perfectly.I have read about the "Profile Rule" options in the administration...

Has anyone ever configured a SPA102 to work with a CME router as the analog gateway for 1 to 2 phones?If so, would you be able to share some screenshots of the config on both the SPA2102 and the CME ?I've done this with a VG224 using H323 but with th...