Hi All,I have a problem with Busy Lamp Field wich i want to configure on a SPA525G. I have configured the same user account on a SPA504G and a SPA525G. I want to configure a unused line key to act as BLF and i use the URL fnc=sd+blf+cp;sub=BLF_587@**...
I am stumped with this one - hoping someone may have dealt with a similar situation and can help me.I have a customer with a UC540 with SIP to the PSTN.Several users have Single Number Reach configured on their phones. It works fine with inbound cal...
Anyone know what the power consumption in watts is for the SPA 504G? I am proposing a Cisco SF300-24P PoE network switch for a voice installation and I want to be sure all the ports will be available for the PoE phone connections. The switch specs ...
Problem: All incoming calls display only FXO lines on the UC320W. No Caller ID is displayed. Verified incoming Caller ID's with another phone. All lines displayed proper Caller ID's. Service provider is Bell. Located in Canada, Ontario. Completed F...
This problem has been annoying me for about one year. We installed a new NetGear R6400 router at this remote workers location, who had been using the same Cisco SPA525G2 phone for several years. The BLF subscribed line keys were working properly befo...
One of my clients has an 'interesting' problem that probably can be solved with a translation pattern on the right dial-peer. I have tried a bit myself but obviously without the desired result. Let my describe the situation. 1 - Device 1 - old analo...
I have a brand new SPA122 and configured it to connect to my VoIP switch; all that works fine. The issue is with management connectivity via the browser. After it pulls its VoIP configuration, it reboots (as expected) and when it comes back online,...
Good morning, In my company we are having some problems with the SPA504G phone. We can not transfer calls if we have one on hold. I give the example of the following situation: 1) A call comes into the SPA (call A).2) The receptionist answers the cal...
So since these are EOL'd and you cant get official support anymore, I need some help. Simply put, we have three UC560's all connected via the 'built-in' site to site config. All tunnels show up and healthy. When they dial, the phones ring but they ca...
Hi Guys, I have an asterisk-based PBX with ISDN public Line,some extensions Cisco SPA502G and some extensions Gigaset. When I call a busy public number through the Cisco Phone I don't hear the busy tone but hung up. When I call through the Gigaset P...
I get a message from cca cannot connect to telnet I can telnet and ssh in with new password not old I can enable in CLI with Old password not new I have tried everything i ac find on this Any help would be great I believe this should have worked CLI ...
Hi Guys, We currently inquiry about moving to the SIP technology, however got told our UC560 will not be compatible but will need to get a SIP converter. (Integrated Access Device) not sure if this correct as I couldn't find any compatiblity detail...
When our users hit the "messages" button on their phone to check voicemail they all get a busy signal. I tried logging into the webpage of the Voicemail server and get a "page cannot be displayed" error in IE11. I tried Chrome as well and the site ti...
Hi We have an issue on a UC560 where inbound calls via SIP to the autoattendant don't get answered (Just rings and rings) calls to the same auto attendant from ISDN are answered. SIP calls to a phone work ok, with 2 way audio. Anybody have any ideas...
Hi Just wonder if anybody can help with the issue we are having with a SIP connection and Unity Express. When a Inbound call comes into the AutoAttendant the phone just rings and rings and is not picked up by the AA, when the same SIP is pointed to a...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: