Voice Systems and Accessories - Small Business

I have a UC520 and have 1 public IP and on WAN(FastEthernet 0/0)I have now  added a se condary IP on the same wan and it shows up like thisinterface FastEthernet0/0 description WAN ip address xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy secondary ip address xxx.x...

What free Cisco software applications are available to enhance the value of the UC-540? For instance;ApplicationNameDownloadTAPI IntegrationCisco CME TSPhttp://www.cisco.com/cgi-bin/tablebuild.pl/ip-iostspIP SoftphoneCisco IP Communicatorhttp://www.c...

I have a client who utilizes 7925 wireless IP phones. They wish to only handle one active call at a time. I have implemented the huntstop channel command under the appropriate ephone-dn. This works perfectly for them, except...They also make use of V...

We're hoping to hook our fax machine up to our UC520.  We want to set it up so that incoming calls on that line go directly to the fax machine, I know how to do that.  I also want the fax machine to only use our dedicated fax line.  Could you please ...

Hi,I have a setup with a SPA9000, SPA400 and several phones (962,942 and 922). All phones and the 9000 are flashed to firmware 6.1.5.My problem is that after some time (didnt figure out how much time) outgoing calls only have one way audio.I can hear...

Hi,Using the "Conference" soft button to add another line to my conversation, there is a loud continuous beeping for 2-3 seconds after the conference is established.  How do I prevent this?Thanks!

We're hoping to setup fax detection on a PSTN line of ours.  We have a pstn fax line plugged into a FXO port.  We would like to have our UC520 setup so that if a call comes in, if it is determined to be a fax, it automatically forwards it to extensio...

HI,I have an SPA9000 and SPA400 connected with 10 SPA9xx, 1 WIP310 and 3 SPA504g, the problem I have it´s when an incoming PSTN call istransfer from an SPA9xx phone to an SPA504g phone (any of the 3 phone I have), the SPA504g phone freeze, the only w...

Hi,is there a list ?Syslog messages are "request reboot type=xx , reason=xx"

Hi,I have a UC560 with model phones SPA 504G+500S and 501G.In this  situation there are 3 assistants. This assistants have a 504G+500S  phone.This assistants with their phones have to monitor the lines of the  others users. The others users have SAP ...

Hello:We have a Cisco Unified Call Manager (System version: 7.0.2.22900-3) and a user wanted to try out the SPA525G phone, specifically for it's built-in BlueTooth functionality. Got the phone up and running as a SIP device, but now the user also wan...

Hello Guys,I have the following configuration:spa400 X1   firmware 1.2.2.2spa9000 X1  firmware 6.1.5spa942 X 7  firmware 6.1.3 and 5.2.8spa962 X 1  firmware 6.1.3spa901 X 1srw224g4p  24 port switchI have configured the spa400 with 2 PSTN lines, befor...

I've previously been running v3.something of the firmware which allowed you to set the FXS port impedance to 370+620||210nF which was the standard all the instructions told you to use for a UK BT Line.I've now upgraded to version 5.1.10 of the firemw...