VPN

AnyoneI have the following scenarioASA5505 with some servers on the inside, I access the servers from outside with static NAT, use on offical IP per server, and just allow the neccesary ports, I do a DNS rewrite for access to servers by FQDN from the...

Greetings All,I have an interesting situation:Our Cisco VPN (ASA 5510) with RDP or windows file sharing works great in the United States.  However, when traveling to our other office in the Netherlands VPN connects, but I cannot RDP into servers/work...

I have a tunnel connected between an RV042 (remote) and ASA 5510 (local network), but I can not ping, see or connect to any of the local network servers. Using the VPN client, I can connect to the 5510 and be able to see all of the servers on that ne...

Hi This is a question about this vulnerability "Cisco Adaptive Security Appliance WebVPN Login Page Cross-Site Scripting Vulnerability", I have Anyconnect and Webvpn enable on an interface, the running version is 8.4.4 and 8.4.5, the associated bug a...

Hi All,I'm having some issues with a site to site to site VPN. i've attached a diagram to help. In the topology i have a Pepwave HD2, Cisco 861 and another cisco device. The pepwave provides both cabled LAN traffic and failover 3G traffic. I have cre...

Hi, on cisco router, i've made configuration, and now i can connect remotely with cisco vpn client with my username/password.but i want to create some other profiles, with other settings/acl, for partners, so after they login with cisco vpn client, t...

Hello, I am using AnyConnect 3.4.04072. When I am connected to the VPN, even though "allow local (LAN) access..." is checked, I still cannot access local servers. What's wrong?

I am running a 881-w in the office. We have a couple of outside sales people that need access from time to time.I installed and tried connecting to our router with Cisco VPN Client.   I think I may have configured something in the EZVPN settings wron...

I have an ASA 5505 that has been configured for dual ISP failover and remote access vpn. The remote clients are able to connect to the ASA and tunnel gets established but they are unable to ping anything in the inside network or go to the Internet th...

I'm having a problem where a user is being denied access to the ASA because the host scan does not see his antivirus running. The user just upgraded his AVG antivirus  to the latest version and this version is not in the endpoint assessment attribute...

Hi all, I am going to try and explain this best I can without exposing any IP address. So here is the issue. I have an existing Site-to-Site VPN with a client. This has been working perfectly. Recently my client setup a new server with his DMZ. He is...