VPN

I have a site to site vpn set up from my office to a remote office. I am planning on putting my DR data storage at the remote office. My current private network is a 192.168.99.0/24, and my backup network is secluded via a second nic on all my server...

Hi, I have a AS5400HPX device with a AS5400 T1 2 PRI DFC card installed and T1 link. I need to check the inbound calls on the T1 PRI link. 1) What commands can help me check verify if the call lands on the router, and what is the source number which ...

Hello gurus!I have a question about nbar because I'm applying protocol-discovery on my internal interface (just internal interface) but when I type show ip nbar protocol-discovery appears (only as a output) that there are IPSEC traffic.Why I see ipse...

Hey everyone,I am experencing an issue where some of the devices at a remote site have a different default gateway other then the firewall (at the remote site). This prevents pings from the local network to those remote site devices. Does anyone have...

                   Hi,I want to backup ASA confifuration using ASDM: tools>backup configurtaion.will I be able to restore this saved configuration on new ASA and run that new ASA??I just want to confirm before doing it to avoid any loss of configurat...

Hi all, I have a Cisco 881 in the branch site configured with ezvpn, and one ASA 5515 in the head office, and it is working fine.I'm planning to configure a second ASA 5515 with a backup ISP in the head office.So, can I configure a redundant peer in ...

Hello, I have run into a problem with traffic returning on a site to site VPN. We can send our http request across the VPN, it gets there fine, but upon arrival, the other side is closing the connection with TCP RST and AGE OUT flags,and we are getti...

Hi,We have ASA firewall(8.6 ver) at one end and other end is fortigate firewall. Behind ASA we have Local LAN segments(MPLS) and advertised via OSPF.And we have a VPN between ASA and fortigateNow My requirement is I want to redistribute the Remote LA...

Here is what I haveNetgear DGN2000 wireless router/ADSl modem at home.iPhone 5 iOS 7.0.33. iPad 2 ioS 6.1.34.Cisco AnyConnect app installed and I think correctly configured on ip5 and ipad25.FileBrowser app installed on ip5 and ipad2Here is my proble...

Hi guys!I have remote vpn configured on my ASA 8.6.1 and it works fine but i want to access to multiple networks which are situated behind inside interface of ASA. Vlan 3(192.168.3.0/24) <=Cat 3750=>  Inside int ASA (192.168.10.0/24) == Outside inter...

I have a remote access VPN via an ASA 5510. Clients are currently using the Cisco VPN Client which I believe is coming to an end or has...?I've upgraded the ASA to most current IOS and also the ASDM as I want clients to use anyconnect. I've done a lo...