VPN

Hi guys,I have to replace a Draytech Vigor 2950 with a new Cisco device for a customer, as the Draytech does not support any more than 10 site-to-site VPNs. I've seen that Cisco 880 Series allows up to 20 IPsec Tunnels whereas Cisco 890 Series allows...

Hi ,the command sysopt connection permit-ipsec ?when I enable that command the vpn conenctions will be allowed inbound from the tunnel without checking the outside interface access list .Suppose the vpn traffic is coming to dmz interface . DO I need ...

Hi,We have been having persistent problems with our ACS, which WebVPN uses for RADIUS authentication (via LDAP). It's been so bad, that we have had to resort to restarting the services every 15 minutes just to allow people to get in. I would open a c...

Hello,I've got a problem, I currently have an AnyConnect profile/tunnel-group which works as follows (this part is not the problem) :The user authenticates over a Radius server (freeradius)The Radius server connects to a LDAP database, and verify the...

We have a windows 2003 DC running IAS. We are currently using this setup to authenticate VPN users connecting through a PIX firewall and Cisco VPN Client. This setup works fine. I would like the VPN client though to prompt users when their passwords ...

our company is using Cisco VPN client, can anyone please tell me which program I should use to do the real time monitoring?is Cisco VPN client compatible with Microsoft RRAS?thanks.                  

I'm trying to set up a VPN with a vendor that is using the Amazon VPC.  The configuration looks fine on my side, but I'm getting the following error:IPSEC: Received an ESP packet (SPI= 0xBBCF6A53, sequence number= 0xF447F) from 1.1.1.1 (user= 1.1.1.1...

Hello Guys,I have two ISP which is configured on two different Cisco ASA, seperately, Pls. refer below configurations for both ASA, My requirement is to put both ISP and configurations on single ASA and second ASA will put for failover Active/Standby...

Hello.We have an ASA 5510 up and running since 2 years, with many vpnclients configured.Now we want to enable also l2tp.I've followed this guide:http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080bc7540.shtmlat the end of the conf...

                  Hi,any suggesion how can we change the peer ip on vpn tunnel any command or config. have site to site vpn tunnel with two company. one company wants to replace their firewall so on our end we have been ask to do only IP change with ...