I have a primary and backup asa5510. The primary has numerous site ipsec vpn's configured with different isr's, the backup also has the same site vpn's configured. Each isr has a backup peer to the backup asa configured. Both primary and backup pe...
Hi Folks,Anyconnect has been working fine for me for a long time. I recently started sharing my wired connection via a wifi ad-hoc network, and for that, sharing was enabled for the vpn client. I think that ICS is not officially supported for the a...
Hi all,I want to implement Active/Standby cluster with a pair of 5550 ASAs and I have a licensing question. Here is the "sh activation-key detail" output from both devices...ASA1:sh activation-key detail:Serial Number: XXXXXNo active temporary key.R...
Our client has a vendor who needs to establish a VPN tunnel to their own router which sits behind our Firewall. VPN Concentrator (Vendor) <------> ASA5505 Client (7.2) <-------> 3750 Switch <-------> VPN router(Vendor) Here is the set up info:ASA out...
Hi,I have 2 ASA 5505 routers i'm trying to vpn - I have one asa 5505 that is already setup already and a pix 501 is vpn to it already. so now I bought a second 5505. What info do I need to get from the already setup asa 5505 so that the 2nd 5505 can ...
Dear All, I have a requirement to configure Site-to-Site VPN with HO. i have my internet link termintaed on router and got only one public ip. my ASA is behind this router with no public ip (attached diagram). This router will not su...
Hi there,I'm newbie in the CISCO supportforum and have a question about VPN Tunnels between ASA's.My ASA's have the follwing Versions: ASA Version 8.4(3) ASDM Version 6.4(7)Have I a chance to configure a site-to-site tunnel with a hostname as peer a...
Hi to everyone,It is possible to use cisco vpn client in a different sessions of terminal server simultaniously? It means login into terminal server with 2 diferent users, that means 2 diferent session simultaniously, then with this 2 session use a c...
Hi, I've been looking for a good tutorial/admin guide/config guide but no luck. Could you someone provide me link or something please.Thanks for your help!
Dear all,Recently we have tried to migrate our RSA server to a new environment and new version, this by itself was a succes, however the ACS had to be modified to be able to use it for our VPN tokens.The ACS server is running version 4.2 on a windows...
we have anyconnect set up and working, except for split tunneling. in the ASDM 6.4 I went to : remote access VPN > network (Client) access > group policies > GroupPolicy_anyconnect_vpn > edit > advanced > split tunneling > then unchecked "inherit" o...
On my ASA5520 I am trying to do a IPSEC tunnel between two sites. When I ping the protected network on the other side I get this when debugging IPSEC:IPSEC(crypto_map_check): crypto map manmap 20 does not hole match for ACL man1Not too sure what this...
Hi.I have a Cisco 881 ISR (CISCO881-SEC-K9) and have the advanced security license installed and enabled/active and in use (see screenshot). However, the isakmp crypto module is not available.cisco#crypto ? gdoi GDOI related comm...
one site to one site VPN works no problem, but when I add the second peer in the hub router it does not connect. There is no routing in place all routers are connected to the same switch and with no crypto map they can both ping 192.168.2.1. With cry...
