VPN

I am looking to NAT all of my traffic going to the VPN site to site tunnel and only use one IP.  Has anyone done this?  This is the configuration I am using:access-list my_accesslist extended permit ip 192.168.1.0 255.255.255.0 object-group remote_ad...

I am currently using VPN Client Cisco Anyconnect VPN Client Version 2.4.1012  for Windows 7 to connect office network.  I want to buy an "AnyConnect Secure Mobility Client License"  for my Galaxy SII phone.How should i buy it?

Hi All,I have a question.Is that a big problem to have different Phase 2 lifetimes configured on L2L VPN tunnels on both ends?Like one end has P1 lifetime set to 86400 P2 lifetime set to 86400 and remote end has P1 set to 86400 and P2 set to 28800.Th...

Here is the Pix config:sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set fortinet esp-3des esp-sha-hmac crypto map outside_map 10 ipsec-isakmp crypto map outside_map 10 match a...

Check out my second post - I've gotten a little further but still need helpI've got a very basic configuration, and I just added configuration to allow a remote access vpn.My issue is that I can connect to the VPN but I can't ping others that are con...

I just installed Lion 10.7 on my iMac and can no longer use the downloaded Cisco VPN client to connect to Microsoft Remote Desktop and access the PC in my company's office. When I try to launch the VPN client I get Error 51. I used to be able to ente...

Hi Everyone, I have a teacher that just bought a new Mac.Mac OS X, V 10.6.7, Intel Core i5, Darwin 10.7.4, 64 bitI have tried versions below with the same results.vpnclient-darwin-4.9.01.0180-universal-k9.dmgvpnclient-darwin-4.9.01.0280-universal-k9....

Cisco VPN Client was successfully installed on a MacBook Pro, OS-X 10.6.7. No issues importing the .pcf file.However, when executing the Client an error -51 is returned stating "Error 51: Unable to communicate with the VPN subsystem".What is causing ...

Hello,A user in our office needs to connect to a client's remote PPTP VPN but can't connect.  The user is running Windows 7.  We have a Cisco PIX 515e firewall that is running PIX Version 6.3(3) - this is what our user is having to go through to try ...

HiI have Cisco RVS4000 and Linksys Befsx41.I can make a VPN connection when bought are in Static ip-address.RVS in static ip and Linksys in ISP changing ipconnection is not made.What can I do to make this happen ?Without using dyndns. Mika Here is so...

Hi,Trying to get this working and just will not work!  I have Cisco  Anyconnect SSL VPN and the client connects fine.  but cannot ping the  default gateway (ASA) 10.15.202.2. From the ASA I cannot even ping the client  who gets the 1st IP address ou...

From what I can tell, there is no way to specify in each group policy which script to run on connect for anyconnect 2.5.Either scripting is enabled on the profile or it isn't, thats it. Is this a bug or am I missing something?I need to be able to run...