Hi,We have remote access VPN configured in our Data Centre on Cisco ASA 5520 ver 7.0. for users to be able to connect data centre network.I have observed a strange thing -If users connect from thier home using WiFi Broadband Internet connection, VP...
My first time using this service ... please be gentle.I recently setup a vpn anyconnect for a specific application. My question, if I use the command " show conn"VPN01# sh conn | i 172.18.7.36UDP Outside 172.18.7.36:1123 DMZ_ADM 10.7.16.57:81, i...
I believe if we enable the sysopt for ipsec traffics on the FW then it wont looks for interface ACL and acl will be applied by using of vpn filter on group policy profile.My problem is like.. the user is connected on vpn from outside and trying to do...
I am unable to SSH to the inside interface of the ASA when I login to Cisco VPN client. When I tried to SSH, nothing is displayed on the screen. There was no error message. Do you have any suggestions?ip local pool vpnpool 10.10.0.1-10.10.7.240 ma...
hi there,I'm trying to setup a VPN between a PIX and a Draytek. I've managed to get the tunnels to form but no traffic seems to be going down them. I'm guessing there's an error with NAT or an access list??I notice in the PIX under IPSEC rules it say...
I got the error message when I tried to assign an IP address to a user account (vpn-framed-ip-address 10.10.7.240 255.255.255.255). The error message was "Error: invalid IP address/net mask combination" . Can you see anything wrong with the IP add...
To my situation: I have several locations that are routet via MPLS (from my provider). In the locations 192.168.x.0/24 nets are used. The Provider Gateway is always 192.168.x.1. At the location 34 (192.168.34.0), we have also an Internet SHDSL line. ...
I have multiple VPN endpoints setup on our Cisco 2821, an SSL VPN, a site-to-site VPN, and a Web VPN for windows users. For whatever reason, the web vpn service periodically fails. The only way I've been able to bring it back up is to reload the rout...
We have ASA 5540. After setting up one-to-one nat, do I need to do anything else?static (Inside,Outside) public ip address private ip address netmask 255.255.255.255Thanks.Diane
Hi All,I was running 5.0 version of VPN client in windows 7, when double click on the VPN client, it was running but wasn't shown up on the desktop and only shown in task bar. I've upgrade to latest VPN client for 64 bits, same issue.any suggestion w...
*xpost from voip forum*Having trouble using CUPC 7 through new ASA on SSL VPN (Anyconnect 2.5). Firewall rules have been opened to allow traffic, and am able to sign in, however unable to use softphone, or set status to available. Routing and FW...
I have inserted a certificate check in the secure desktop prelogin policy. When using AnyConnect client version 2.5.2019, both Windows 7 and Windows XP computers fail to connect. The following pop up message is displayed...Posture Assessment Failed:...
Hi,First let me explain I do not usually deal with Cisco devices anymore and have never touched one of the ASA devices before so any help you give me would not only be greatlt appreciated but will need to be in baby steps.Okay now to my problem, we h...
