VPN

Hi We are in the process of upgrading the IT n/w infrastructure. Our Head office hosts all the servers. I want to establish vpn connectivity between our head office and our 4 branch offices.Head offfice LAN - 192.168.1.0 /24Remote Office 1. LAN 1 - 1...

Hi,I want to setup SSL VPN for Nomad users on ASA 5510 i have following requirements> what are the License requirement on ASA 5510 for SSL VPN with Anyconnect?> VPN users should have full access to LAN via ASA> Authentication method preferred, Local ...

There must be an ACL configuration issue.  How do I configure the ASA 5505 so that the computersbehind it can ping an internet IP address such 4.2.2.2 or www.google.com.Thank you,David

I have setup a ASA5510 to provide remote access using SSL Clientless VPN.  When connecting to the network using this process it all works fine.The issue is the first time I connect using either IE8 or firefox 3.6 I have the option of using activeX or...

I need to setup a VPN tunnel that NATs traffic over it.  I already have VPN tunnels established as well as NAT traffic.  I've done this on an ASA and VPN concentrator, but have seen some places where people say its not possible on a router nor have I...

Guys, I'm trying to allow AnyConnect VPN clients to access external internet sites through the ASA (no split tunneling). In other words, I want users connected over VPN to be able to access the internal network, as well as be able to access external ...

hi,i have 2 questions on IPsec vpni have a asa running ipsec vpn (l2l) to remote site with network of 192.168.0.0/241> i can ping 192.168.0.1 but not 192.168.0.111. i had observed "recv errors" whenever i ping to 192.168.0.111.i had observed recevied...

Hello,I have some doubts about the VRRP process in VPN concentrators.1) The Group Shared Address (public and private) it's the same than the Real Ip Addresses of the Master, correct?For example, if I have configured like this:Master: public(10.10.10....

Hello Everyone,I am looking for feedback and options for a VPN solution.  The attached diagram illustrates the network layout and what I am trying to accomplish.I have a client at Site A that needs to establish a VPN tunnel with an outside 3rd party,...