VPN

I am having trouble after switching from a PIX to a new ASA. I used the migration utility and about half the VPNs are working on the ASA and half get an error like (acl-drop) Flow is denied by configured rulewhen I do a packet-tracer command to try ...

We have a ASA in the company but multiple remote users. The problem is only one user can connect to VPN at a time.There are about 15 Users who want to connect to VPN but they are not been able to.How do I get this working.Thanks

I can understand why you would specify SSH as the required transport for the VTY lines, but why would you do it for the line con 0 line? Isn't this normally used with a serial connection?..

Hi all,Trying to get CiscoVPN client (5.0.02.0090) on Vista Home Premium connect to ASA5505.As the title says the SA proposals are found unacceptible.And although I've been searching for solutions all over the place I 've not found a working solution...

Are there any plans to release a Cisco VPN app for the Palm Pre?

Hi allIs it possible to have the source of my vpn tunnel as 1 address that has been overloaded? if so, how would I do this, cause normally you have to overload to an interface, would I do it to a pool of 1 address, or can I overload the tunnel addres...

Hi all,I have received my ASA 5505 and 871 router that I want to use to configure IPSec VPN between my two sites. One site will be using ASA while branch office will have 871 router. I am new in security area and need some guidance. Can anyone help ?...

Dear all,i have configured remote access vpn on cisco asa 5510 it was running cisco IOS 7.2 version and then i upgrgaded it to cisco IOS 8.0 but still the cisco vpn clients cannot connect to VPN following is the log on the cisco vpn client Cisco Syst...

Hi,is anyone managing Site to Site IPSec VPN's between a managed firwall and a 3rd party (unmanaged) firewall with Cisco Security Manager? From the documentation (and testing) it appears that VPN's between managed and unmanaged devices are supported ...

How can I confirm that traffic is going over a l2l VPN tunnel on a Cisco ASA 5510?I'm trying to troubleshoot a lan-to-lan VPN, and I can see the expected packets with a capture command but the remote site indicates they are not seeing any traffic at ...

Which version of ASA software release supports "Nested SA"?Thank You

HelloI have a problem and I dont know exactly what to do. Problem is following.I have cmts ubr10k and numbers of cable modems. I try to bind some of the cable modems to same vlan and then others to another vlan. Like 10 same vlan and then 20 to anoth...

Sirs,I am experiencing the following issue:- I have an Avaya IP Softphone at my users Notebooks, that when connected directly to the PBX, and I sniff my notebook using Wireshark, I can see the packets are correctly marked with DSCP 46. But when I con...

I have a cisco 1721 connected to a cable modem, and forming a site to site VPN tunnel with an aSA 5505. I was using EZVPN. A couple days ago, traffic stopped passing through the tunnel, although the tunnel was up. I tried setting it up as a sraigh...