VPN

i was trying to setup remote access vpn between ios router 12.3 and vpn client 4.x, using microsoft ca.. but i was unable to connect with vpn client .. i dnt knw where i m going wrong .. my rtr cfg is as followsversion 12.3service timestamps debug up...

Hi All,I am setting up a 1841 ISR router for terminating remote access ipsec vpn-s, and I would like to restrict the client to use certian firewall rules. I understand that VPN Concentrators are able to push firewall policy to clients (CPP) but what ...

Hi there, I seem to be having an issue getting the SSL VPN working to my Cisco VPN Concentrator. I know this works fine using IE6 (been playing around with it all day in the office) however now i am trying from home it wont work and i have IE7. I h...

My customer have PIX515E as the vpn server, and have many remote users over the Internet.So, users vpn in to outside interface.We as the hosting company, we have another PIX attached to customer network, outside is customer, inside is us. This PIX p...

Hi folks,I have this problem. I built out a LAN for a customer using private IP addressing. On the WAN side I'm using a pool of public IP Addresses to provide NAT. The LAN works for most Internet applications including voice but I have an issue with ...

I am connecting cisco 871 router to a modem using console port. the modem requires no AT command to bring up it's attention. it request the router to start PPP authentication command directly without dial progress. can cisco router 871 do what it is ...

Hi - This may be a common problem, I'm new to VPNs so please be kind!I have posted this elsewhere, but believe this to be a better place for my post - if an Admin could delete my post in the infrastructure forum that would be great.We have a small ne...

Hi,I've been reading about the password expiration feature for the VPN Concentrator using Radius to a MS server:http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2284/products_configuration_example09186a00800946b9.shtmlDoes anyone know if thi...

Hi - This may be a common problem, I'm new to VPNs so please be kind!We have a small network with a server running SBS2003 Std with only a basic firewall - it does not run ISA server.The configuration is:-Internet <---> Router/Modem <---> External NI...

Hi,Please enlightened me on the correct configuration for my setup.I need to setup an IPsec VPN connecting to Verizon SIP PRoxy. My question is where should i configure my VPN Config in my Cisco Router. I need to connect our SIP Proxy with MCI. Below...

I tried to solve this for quite a while, but... No luck. Here's the current situation:Router that performs the dialing has an ISDN BRI card. This is 2621XM with IOS 12.3(6f). Hostname is RTBeograd.Access router has a PRI (E1) interface, and this is 3...

I have problem with softphone ,when am using ssl vpn (ASA).i got one way communication .Is there ant possible solution for solve the issue ? anybody facing the problem previously ?Am using nortel softphone.when am connect thro ssl vpn ,i can reached ...

I have this PIX501 box and this is what I want to do:Outside: connect it to a DSL modem (yahoo/ATT SpeedStream 5100). Use DHCPInside: connect to one or two PCs. Use static IP. The PIX box's inside IP: 192.168.1.1The Yahoo's DNS server IP: 192.168.0...