VPN

Hi!We have a problem when enabling mode configuration. ESP tunnel setup works fine without, but when we enable mode configuration in the client, our Cisco router doesn't accept the IKE phase 2 proposal.The error seems to be "no IPSEC cryptomap exists...

Hi,I'm doing a test with 2 506's and VPN clients.I want the following:LAN 1 ----PIX1 ----Internet---- PIX2 LAN2and VPN clients connecting to the PIX 2 so that they can access LAN 1 and LAN 2I've configured the site to site successful and also the VPN...

Now I have learned: A dynamic tunnel will never land on a separately created group, and I have to use the DefaultRAGroup. Ok, but if I have more than one remote site with dynamic ip address then I have to use the same PSK because PSK is configured in...

I am trying to set up a DMVPN topology. I can get the tunnel to stablish and to communicate qith the inside network on the hub router from the spokes. However, the hub router only has one outside interface, which is the one used to stablish de VPN an...

I have 5 sites connected together with me and single VPN concentrator which is used by my remote users to gain inside access.I want to have a setup such that even if my one user from site 1 goes to another site2 he should be able to access my network...

I have a class C subnet delivered by my ASA 5540 for Remote VPN (10.3.18.0). When someone VPNs in they get an address like 10.3.18.6. They can get to other networks that are not on 10.3.0.0, like 10.10.0.0 or 10.19.0.0, but are not able to get any ...

We had a L2L VPN tunnel between our two offices. The remote office had problems with their Internet router so the ISP replaced a bad interface on it. Since the change, the tunnel has not been able to connect.I looked at the log file and searching f...

Hi,i am trying to use a IAS Radius server as Authorization server (only authorization, no authentication, i do authentication with another type of server) and i must include a field called "Common user password" in Servers|Authorization|Add/Modify w...

We ceated a vpn tunnel between our headoffice and a remote branch. We can ping the outside interface of the remote branch pix and vice versa. The problem we have now is we can't ping the remote branch's subnet. Here are the configs we're using on the...

Does anyone know if there is a way to restrict a user to access only a certain number of IP's through PIX when he/she is connecting through a VPN connection setup on the PIX itself ?

Hi, I'm having issues establishing a site-to-site vpn between us and a 3rd party's efility firewall (we're using a Pix 515 running 6.3). Their LAN range is 192.168.2.x but their IT people tell me they're NATting traffic to 217.155.130.97. The tunnel ...

I need to setup a vpn to a ASA5520 at site1 from an Tasman 1004 edge router at site2. The edge router already servers as the internet gateway and all the NATs are setup on it. Can the edge router be used to make the vpn tunnel without disrupting oth...