VPN

Hi All, I'm sure there is a simple answer i am missing here, so hopefully I am enlightened quickly! We have an Cisco ASA5516-X on site which the outside interface is a private IP on a /30. This goes to a router that pushes to a core network and strai...

Do IOS 16.x support easy vpn client feature on ISR 1000 series routers which is the replacement for cisco 800 series routers?

Hi all, I have a very vanilla, straight out of the box Cisco ASA and i'm trying to set up an L2TP VPN so I can use the inbuild Windows 10 client to VPN in to the network behind the ASA.This is driving me mad and I wonder if anyone can help? I expect ...

I have a ASA 5505 8.4 that I am trying to get a site to site VPN set up to a ASA 5506 9.6. I have done the wizard on both ends and have the correct keys in but the VPN will not come up.Is it that the OS is to far apart in versions?

While trying to connect Anyconnect, i get the following error, "Anyconnect client service is not responding a vpn connection cannot be established.Contact your system administrator" This happens only on one client pc. The rest which are on the same n...

Hi All,   I am trying to get a tunnel up between an ASA and a Juniper SRX345. I am trying to configure the VPN tunnel for multiple object groups and the tunnel repeatedly errors out:    Unknown IKEv2 Received request to establish an IPsec tunnel; loc...

I've installed a CA (not self-signed) cert on ASA running 9.9(2) using SAML for authentication.  The negotiation between the Anyconnect client (PC and Mac) work ok till the point where there's an Anyconnect error "Failed to generate SAML AuthnRequest...

Buenas tardes, estamos desplegando a nuestros usuarios de portátil la VPN de Cisco AnyConnect Client 4.2. Todos nuestros usuarios tienen el mismo modelo de portátil y me estoy encontrando que en la mayoría nos está funcionando, pero ya hemos encontra...

Forum Im studying ipsec site to site vpn , i am confused about the diffence between configuring encryption and hashing algorithms in 1st phase (ike policies) and phase 2 (transfom set) regards.

All, I have have redesigned my network and now have my Core router(s) using HSRP.  I currently have a IPSec VPN up and running on the physical IP address (crypo map kfc).  I am trying to bring up a new VPN using the VIP virtual  IP address.  In my la...

I am trying to ping 192.168.201.X which is my local network from 10.60.1.X which is my vpn network. What did I miss? here is my configuration: EXSIF-ASAV-VM# show run: Saved:: Serial Number: 9AE3NKPFT2J: Hardware:   ASAv, 14336 MB RAM, CPU Xeon E5 se...

Hello,  I have an ASA accessed by ASDM, used for Anyconnect VPN purposes. I have a profile A and the users connect to it via AAA(Active Directory).I have a need for a second profile B that will give another access. Some users will be able to connect ...

I have been told my 5508-x has sweet32 exposure.Never heard of this. Is cisco IOS protected against this? I am running 9.8(4)15