Hello Community,I am struggling with TRUSTSEC config on DMVPN routers.I've tried to follow config guides and CTS activation on DMVPN Hubs/Spokes seems to be pretty easy, just 2 commands to go for SGT inline tagging propagation:- enable IKEv2 CTS capa...
Forum Posts
Greetings - I'm in need of some assistance to help debug what I think is a NAT problem on a router->ASA->internet<-ASA<-router DMVPN problem. I attempted to garner more knowledge from a couple posts including base source for attempts:https://communit...
Is there any way to disable the confirmation when you copy a file from the router to a tftp server? I need to disable it because I'm doing a web application that manages the routers through commands with rsh. Thanks!
Hi, I have a Draytek 2926 on IP range 10.1.8.0 / 255.255.255.0 and a Cisco ASA on IP range 10.1.1.0 / 255.255.0.0 I've set up a site to site VPN but no traffic passes. I see if I ping from the Draytek to the 10.1.1 range that the byte count of the fi...
Hello All, I have an couple of doubts in the below configuration for IKEv2 tunnel. Please find the below output for policy in IKEv2: crypto ikev2 policy ESI_CANADA_POLICYmatch address local X.X.X.Xproposal ESI_CANADA_PROPOSALproposal BB&T-Proposal Qu...
I am using the Cisco AnyConnect client on my Windows 10 PC "anyconnect-win-4.7.03052-predeploy-k9" and it works great connecting to my newly deployed ISR4331. When I install the same software and the same XML profile on my other Windows 10 PC I get t...
Working on a situation where behind my ASA is a 10.0.0.0/24 network that also happens to be the LAN segment for a home user that needs to connect over vpn. They can connect w/o any issues, but when they do they lose access to their home printer whic...
Resolved! FlexVPN with local accounting
Hi all, I've setup my first FlexVPN on a Cisco ISR 4431 without success and i keep getting an authentication or timeout error and i think that i've put in authentication remote eap query-identity without a server so firstly is this command meant to O...
We have a IPSec peer. Everything works great..IPSec established, from the router I can ping/connect to the remote hosts, but the clients are not able to connect. There is no NAT involved. When pinging any remote IP from the router using the source IP...
Hi All,I have a problem with my cisco anyconnect VPN. Everytime i connect to it and try to browse any browser i get a very slow connection sometimes it gives me no internet connection. Is there a way to fix this in CLI or ASDM? Thanks
Hello, could someone tell me how to disable the CSD installation path on Cisco FP 4110 (ASA 9.9(2)50) https://x.x.x.x/CACHE/sdesktop/install/start.htm ? I've disabled the login page https://x.x.x.x, but when I directly open the link above, the CSD We...
Hello All, Hope you all are doing good ! I need your support to fix following issue which i;m facing right now in my lab using DVTI configuration. Note:- This all setup in GNS3. Note:- All the routers are running Version 15.2(4)S1 . Issue:- I can't...
Hi. I am trying to connect to my Cisco ASA 5516 using Anyconnect, but I'm getting errors. I've tried this on Ubuntu 19 and Ubuntu 18.On my MacOS, it works! Using the same credentials and the same router. Linux client version: 4.7.00136 Does anybody ...
Hi, Using thegreenbow client, and am having some issues when disabling the "split tunnel" function. Once the computer is connected to the gateway, I am able to grab files from the server, but am unable to access the internet. Is there a way to chan...
Resolved! Anyconnect deployment query
In a large setup, for instance around 100,000 users what is the preferred way to deploy anyconnect client on endpoints ? Also please tell us the correct method to deploy the profile.xml as well ?
