VPN

Dear AllI am configuring lan to lan VPN at ASA. As we know, we usually need to disable nat for this traffic using twice nat. However I saw this command nat-t-disable, which could be used under interface. So my question is if we can replace that twice...

Hi,Suddenly I have this error with my client cisco annyconect client ver. 3.1.04063 with my computer with windows vista SP2.Login denied. "Mycompany" security policies have rejected your login.I tried to uninstall and reinstall the client annyconect ...

 Hi,I need to give VPN clients on 10.40.220.0 access to the 10.39.216.0 s2s VPN via this ASA on group MTLONVPN.Any help appreciated. Thanks ASA Version 8.2(5)!hostname MTLDRASA01enable password yWL0OyyyF2vJCKw6 encryptedpasswd EMM5CEA7494udygX encryp...

Hello, I've an odd issue with an ASA running version  9.22-4When remote user connect using the Cisco IPSec client  (5.0.07.0440) the username/password login box closes quickly with an error 433 (reason not specified by peer)Sometimes it stays open fo...

Hi,I have PFS configured (at least I think) but when I do a 'show crypto ipsec sa', it says 'PFS: N' ...interface: Tunnel0    Crypto map tag: Tunnel0-head-0, local addr 1.1.1.1   protected vrf: (none)   local  ident (addr/mask/prot/port): (1.1.1.1/25...

I have a question on setting up a Lan to Lan VPN and whether or not existing routing will prevent the tunnel from working correctly. Here is the setup. Both local and remote firewalls are ASA 5520's (8.2) . The local subnet will have its local encryp...

Hi everyone. I have a ticket at work. I have to do a report about remote access VPN in XLS file. VPN server is based at the PIX firewall ( PIX Security Appliance Software Version 7.0) and ASDM 5.0. Report should be look like table bellow. May be it w...

Does someone have a script that backups up the ASA configuration and all the "extra" files (like 'dap.xml') that runs from 'cron' or equivalent?The ASDM has a manual backup command that seems to get most (all?) of the locally modified files, but can ...

Dear All, Can please advise why in Isakmp sa detail, we see Local as 23.x.x.x and remote as 42.x.x.x.In just Isakmp sa, we see dst as 23.x.x.x and src as 42.x.x.x (Please see below. Both commands are executed on the same router) Thanks in advance. R1...

Hi,I got a Site to Site VPN connection that works properly.Extended Office does not have a static IP address so I used a connection profile "ExtOffice" on main site.ASA on Extended Office has a certificate that match on this connection profile. If th...

Hi All I have a customer who has purchased the new ASA5506W (with Built-in AP) Firewalls and needs to configure EzVPN on them to a Head Office site. The EzVPN feature was removed initially from the ASA5506 series Firewalls but will be returning in IO...

Hi Expertise, Any connect client can access to Office and vmware server via VPN. It is working well.I want to print back from office to any connect client's printer.Can you kindly advice? ThanksHain