VPN

I am trying to configure the cisco VPN client for certificate authentication on my ASA 5512-X. I have it setup currently for group authentication with shared pass. This works fine. But in order for you to pass pci compliance you cannot allow aggresiv...

Hello My boss came to me, we need metrics, how many unique users log into our LAN remotely per day? We have a Cisco ASA 5585 which I use ASDM to connect and monitor logs with users VPNing into our environment with the Cisco AnyConnect VPN client. How...

HiI set the IPSec on the DMVPN on HUb and Spokes as follow bellow, But I get the Error on All DMVPN end points.I am using CSR1000v on a rack rentals site. R18(config-if)#*Jan  2 02:18:24.458: %ACE-3-TRANSERR: IOSXE-ESP(11): IKEA trans 0x63; opcode 0x...

Hi ! i've been struggling for a while on this topic and thus coming to ask questions here ..  I'm trying to build P2P IPSEC using certificates issued by Opentrust PKI. Basically, the 2 CPEs are of an MPLS network that will use GETVPN, but for now i'm...

Hi Experts, Good Day! I am tasked to implement RA-VPN to my client and this is my first time to implement it. I need some advice from you guys regarding my design, technically my 2 ASA will be on Active/Standby each ASA is connected to ISP just like ...

Guys,I have configured a SSL Anyconnect vpn in my ASA 5545 and setup a local IP pool for VPN users. My client is asking a new requirement like the IP address to the remote users should be assigned from DHCP and not from local pool for tracking purpos...

 We have created a site to site vpn tunnel between our main office and one of our partner office. On our end the device is Cisco 2811 router.At partner's end there is a Cisco router as well. The problem is that the tunnel can only be created when the...

HiI have users who currently use Cisco VPN Client and used their AD details and the passcode on their Vasco token to login.We have now installed anyconnect licenses on the asa's and confugred a new anyconnect VPN using the existing LDAP server for au...

Hi  Im new to VPN's. We are currently using VPN Client for VPN users with Vasco tokens for authentication which I believe is done through a LDAP server. We have purchased anyconnect licenses. I want to setup anyconnect VPN SSL full client mode. I wan...

For some reason, starting today, none of my users are able to download their AnyConnect client from the VPN Portal. When a user types in his or her credentials, the log on completes successfully, but instead of redirecting them to download the client...

Hi, we are in a migration phase from site to site to GetVPN. We have one KS and GM installed.Can Keyserver perform the function of KS as well as GM ? Thanks And RegardPushpak