I work for a large company. We have many iPads used for scheduling zoom room meetings and they are all on the same SSID at all locations. These iPads will go through a stretch of having a solid connection then all of the sudden many office will start...
Good Afternoon, I currently have a Cisco WLC 5520 that is servicing a variety of Wireless Access Points (AIR-AP2802I-A-K9 / AIR-CAP3602I-A-K9 / AIR-AP1810W-A-K9) We have been running into a problem where a client will connect to an SSID and receive a...
Ok guys so i noticed on all the wave 2+ APs cisco are now using the U-boot bootloader and documentation for it is little to none. I have a good amount of experience recovering and restoring APs. When i deploy APs for clients i prefer to format the fl...
Hello everyone. Much has been written and said about the design of WIFI for warehouses.I would love to hear from your experience in order to make a decision on a complete system from MERAKI16 corridors each about 60 meters long. shelf's between each ...
Anyone know if it is possible for a flex AP to cach wired mDNS that has been centrally learned on the WLC? Or does this only work when the AP is in local mode?
We have wireless and wired devices that uses Bonjour (mDNS) service to discover each other. I need to configure both wired and wireless devices in the same VLAN . We have Cisco WLC 5520 and APs that support flexconnect feature. I need to configure AP...
Hello Team,we are using new 9800 wlc in our infraWLC-9800/ios-17.9.4aAP-Mode:Flex-connect AAA server-iseAll of sudden all clients from one particular not able to connect to wireless -corporate ssid.Clients struck in 802.1x state and error is 2024/03/...
I've migrated one pair of 9800-80 from 17.9.4a to 17.12.3. I noticed that the APs w/ RRM on the new 17.12.3 on 6GHz have drop drastically up to 8 dBm (see attched picture). Is anyone aware of this change and why on 17.12.3?
Hello!I need help, I have a problem with limiting the speed for connections on a guest network. I've already studied the manual several times, but I can't figure out if there are any such settings on the Cisco 2504 Wireless Controller, Product Versio...
Hello everyone,I'm trying to figure out a frustrating issue. Attempting an install of APSP6 keeps bombing out and I'm unsure what steps to take next. Software: Version 17.09.04aROM: 17.3(3r)Error in question: Dec 13 21:21:01 Eastern: %INSTALL-3-OPER...
Hello we have a local 9120axi AP with a 9800LC WLC that seems to be losing connection. The AP is in flex connect, all config looks fine: AdvancedCountry CodeUS Multiple CountriesUSStatistics Timer180CAPWAP MTU1485AP Link LatencyEnabledAP PMK Propaga...
Hello,We got new terminals Honeywell EDA61K, but we have a problem with connection loss.Wireless LAN Controller is Aironet 2800 Series ME. Terminals randomly lose connection. After a while he returns.I switched the WiFi network only to 2.4. This redu...