We had the problem from 16 of mars on wlc 9800-40 17.12.4 and after upgrade to 17.12.5Could it be continue of the issue and not really fixed?Platform State from WNCD (0) : current DEAD, duration 35s, previous duration 70s Platform State from WNCD...
We had the problem from 16 of mars on wlc 9800-40 17.12.4 and after upgrade to 17.12.5Could it be continue of the issue and not really fixed?Platform State from WNCD (0) : current DEAD, duration 35s, previous duration 70s Platform State from WNCD...
I can not believe there is no installation manual for connecting the MA-ANT-27 dual-band sector antenna's to a MR76.The antenna has two cables labeled V & H. The AP has 4 ports. Two for 5 ghz and two for 2.4 ghz. So which cable goes to the 5 ghz and ...
Hi, I have two Cisco 9800-40 Physical WLCs on version 17.9.4 called WLC-1 and WLC-2. I have configured WLC-1 as the master. When configuring redundancy, I configured one the RMI-IP addresses incorrectly. I saved the config and reloaded. Now I don't h...
We need to rename our 4404 Wireless LAN Controllers. Would like to know if renaming via the GUI (change name in the Controller / General tab and then Apply) will cause the WLC to reload. Also wondering about the best way to push ...
As shown in the image, there is a signature alarm message, but it is not clear on which AP the alarm is occurring.Is there any way to check this information?There is no additional information displayed when using the "show awips alarm detail" command...
I have an ISE-Cluster (acting as Radius-servers) and want to change the priority of the serves, so that blue has a higher priority as the green server (See Screenshot). In earlier versions of the WLC there buttons on the right side of Assigned Server...
Hello, I have a resort with several casitas, I'm looking to use Meraki mesh to connect the casita to the core network, however, I need to place an AP inside the casita to provide internet access. Can I hang an indoor AP off an outdoor Meraki AP? Or w...
Hi guys, I have a 3802E AP currently running CAPWAP that I need to convert to Mobility Express. I have checked relevant suggestions and documentation from Cisco for steps. Below is the version of software running on it(see picture). I am unable to ru...
Hi All,I'm working on a project and need to specify wireless controllers capable of managing approximately 400 no. of Wi-Fi 7 access points. Would the Cisco Catalyst 9800 series be an appropriate option?
We are experiencing an issue with our Cisco Access Points when attempting to join our 9800 series Wireless LAN Controller (WLC), in UAE environment.The issue appears to be related to a country code misconfiguration, which is preventing the APs from s...
Hi AllI am currently working on a project to replace an existing AireOS based wireless network with a new Cisco 9800 WLC with 9100 series access points. This will be a gradual migration by installing the new 9800 WLC in parallel to the existing and t...
Good afternoon,Recently it was required to rebuild the PKI certificate and trustpoints for our cisco WLC (9800-CL). This was due to our internal audit team having concerns that the intial common name was the same as the trustpoint, and not matching t...
Hi,I'm trying to survey the presence of a given entry in the c9800 wireless controller mdns cache. SNMP does not seem to forward this kind of information, neither does netconf. The last idea was to ssh the command, but bash scripts work when executed...
Hi Everyone I’m currently working on a project that involves setting up several Cisco C910AXI-S access points, and I’ve run into a few issues that I hope someone here can help me with. Setup Details:• The AP is connected to a Netgear PoE switch.• The...
Hey everyone,I had a question about the Cisco WLC 9800CL. We are migrating over from using a Verizon provided MIST system. The MIST system uses a guest portal that requires the user to type in their full name, their email address, their company name,...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-20-2026 03:31 AM | ||
| 11-17-2026 11:43 AM | ||
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM |
| User | Count |
|---|---|
| 4 | |
| 3 | |
| 1 | |
| 1 | |
| 1 |