Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Hi Guys, I need to clear the local profling statistic in my WLC 2504, but I don´t Know if this possible Someone, Could give me yours comments. Thanks
Hi, A Cisco 3700 AP is resetting its radio with code 81.The link below has no reference to this code.http://www.cisco.com/c/en/us/support/docs/wireless/aironet-3700-series/117869-technote-ap-00.html ThanksVik Last radio reset code: 81Radio resets - ...
If the UPoE source is working in forced mode, will Cisco APs, that can use UPoE, accept power over all four pairs ?We would like to use a mid-span passive (no handshake) four pair 60W inserter. Thanks, Vic.
i have a cisco router. i have another router (linksys) which is connected to the cisco one. the linksys one is wireless. anyhow, how can i configure these router to let some ip adresses thru freely?tnxyoni
Hi allWe've had quite a few problems with RRM, in particular when we've previously engaged contractors to do AP Placement designs they've failed to consider RRM. So they do their survey with test APs on static power levels, but because of RRM those p...
Hello, Just to make sure...Azimuth for this AP does not really matter, since it has an omni antenna. Is it correct??Elevation 90* up means that AP is staying on the bottom edge, 0* up means the AP is laying on it's back, right?
Hello I'd like know on Cisco AIR-CAP2702 and air-cap1700 and 3700 , how many SSID are supported ? regards Helpdesk
I can't find the list of compatible access points with AIR-CT2504-5-K9 network controller.Are these compatible:AIR-CAP702W-x-K9 - Dual-band controller-based 802.11a/g/nAIR-CAP702I-x-K9 - Dual-band controller-based 802.11a/g/nAIR-SAP702I-x-K9 - Dual-b...
Hi,I have two Cisco 4400 Wireless Controller. one is working fine but the other one is not reachable. Kindly advice how to troubleshoot.Controller: - 4400 SeriesModel: - 4404Software Version - : 7.0.250.0Satheesh.
Hello community,Could you tell me what version of IOS do I have to use for an AP 3702i in order to configure it in Autonomous Mode (and not only in Site Survey).The current installed version of the IOS is 15.3(3)JBB. (ap3g2-k9w7-xx.153-3.jbb)On this ...
Hi All. I have configured ISE for all my wireless clients, and everything is working 100%. The client now want to connect mobile devices to the same SSID. and get the error below. How do I stop ISE from trying to push the Policy & Agent down to the ...
Hi, we are having an interesting issue, in production area, we all running 11 APs with flexconnect mode, they are in the same AP group.some of SSIDs are in local mode centrally switching, but only one SSID is flexconnect mode with local switching. Th...
I do have several AIR-LAP1041N-E-K9 APs joined AIR-CT8510-K9 running 7.6.130.0 in Flexconnect mode. These APs were used in Local mode on an older controller before.I had an issue that the APs were in Admin disable when they reloaded. I had to enable ...
Hello Experts,Recently we have deployed Cisco WLC 5508 in HA mode,One AP AIR-CAP1532E-A-K9 configured as Root AP ( Parent AP ) wired connected to WLC for Backhauling and several AIR-CAP1532I-A-K9 ( Child AP ) configured as Mesh AP without LAN wire, a...
Hi all, I am wondering if the following is possible on a Cisco Mesh Network. Existing RAP & MAPs provide SSID Kerrieswifi. The MAP access point has a switch connected. The switch has a 3500 Lightweight Access Point connected providing a new SSID ca...
