Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Hi all,I've got a licensing issue regarding my two controllers, previously noticed because APs are not joining the controller. The primary controller should be configured with a HA license (I can't see it in the output), and looks like it needs to ha...
Dear Team, Is there any free software for wireless passive and active survey and report generating as well ? Regards
Hi, I have a scenario in which I have an Existing WLC in place. The task is to install another WLC which is going to be in HA with this WLC.The new WLC would be in a different geographical location than the Primary (Existing) WLC. As per my understan...
HiOn a WLAN , i am trying to configure local WLC as anchor controller - when i click on the Anchor controller button on the WLAN page it takes me to Anchor Controller setting - in the drop down i can see other controllers in the mobilty group but can...
AIR-CAP1702I-Q-K9 is mixed environment of autonomous and lightweight access points.But default environment is lightweight.I want to use it with standalone AP.how can I do？ Directory of flash:/ 2 -rwx 287 Jan 1 1970 00:17:54 +00:00 info...
I have a school system where we have desktops in a mobile on a hub and have been using older 350 AP's creating a bridge between the main building and mobile. The old AP's are dying. The main building AP is connected to a 2960 switch.I would like to...
I'm trying to set up Google ChromeCast on our existing wireless infrastructure. We currently have a mixture of Cisco AiroNet 1600 and AiroCap 1600 devices. There is no wirless controller for the environment. I have whitelisted the MAC address for t...
hi is it possible to see up and down link speeds on 819G or 897G when they're connected to mobile network for 3G/4G? In 880 series, the 'sho cell 0 all' used to show "Uplink Max" and "Downlink Max" Mbps speeds. This output is not available on 819G or...
Resolved! Random radio resets on access points
Since an IOS upgrade to version 15.3(3)JAB we experiance occasional resets of radio 0.We see it on the 1140 and 2600 type Cisco Access Points. We are running the access points autonomous. AP#show controllers Dot11Radio 0 radio-resetLast radio reset c...
Resolved! WLC 5508 LDAP setup
We are currently running 7.3.112 on our WLC 5508. LDAP on that version requires all users to be in a single OU. Does anyone know if the newer releases have the ability to search my LDAP tree? I have users spread out over 22 different OU's. I'd li...
Resolved! 1602E Radio Settings
Hi,In 1602E following options can be chosen under dot11Radio0 interface:AP1(config-if)#antenna ? a-antenna use antenna A ab-antenna use antennas A and B abc-antenna use antennas A, B, and CIf a-antenna is chosen only one antenna will be use...
Our customer is complaining about increasing disconnects of Apple devices after rollout of many of these devices.Another external consultant found "Channel overlap issue" as a possible source of problem. I'm wondering now how to deal with that, becau...
Need some information on resolving this issue or how to resolve.I am not sure what this error is: CAPWAP-3-AP_DB_ALLOC:capwap_ac_db.c:144 The system is unable to alloc AP entry in database. If anyone can shed some light on this and provide some gu...
HiIs it recommended to be AP in different subnet than WLC, if yes could you please clarify why?, bcz i heard it is recommended to be AP in different VLAN than WLC bcz broadcast?!! Thank you
I would like to uncheck 'Learn Client IP Address' from SSID on the WLC. Once I do that, will I need to reapply Flexconnect template (through Cisco Prime) for the APs to take effect?
