Hi Guys, Can you please share link from where can I get WLC configuration guide in PPT format , I need to use same for training purpose.I was able to download PDF of same but I need PPT which would be simpler format.
Hi Guys, Can you please share link from where can I get WLC configuration guide in PPT format , I need to use same for training purpose.I was able to download PDF of same but I need PPT which would be simpler format.
Hello,I have linksys spa2102, and the issue is about using 1 SIP account on 2 devices (linksys).In the beginning, when I configured linksys (sip account registred) everything was good.But over time, incoming calls can not be heard. And if restart lin...
Hi,Recently we have purchased a Cisco 2702i-N-K9 AP and installed Autonomous IOS.Now we got the WLC and need to configure with the WLC.when I am trying to download the lightweight IOS(ap3g2-k9w8-tar.153-3.JBB.tar) from the cisco site it is giving som...
Hi Guys, I have one WLC connected with two 6509 cores and I configured in WLC one port as backup and works, but takes around 13 sec to be able to see the second core! can i decrease this convergence time ? Thanks Mohammad
Hi All, We are in situation where we have to authenticate two SSID users with EAP TLS authentication and both ssid user will be authenticated by different CA authority. for example one by versign and one by internal CA. is it possible to achieve ? ca...
Dear, I have more than 100 AP from -E (Europe) regulatory domain, and two outdoor AP from -K (Korea) regulatory domain, in the sametime i have one 3602 AP from -A (USA ) regulatory domain, i enabled multi-country mode on my WLC ( -GB, -K, -A) But on...
i see this being discussed allot with varying opinions regarding speeds beyond 54MB. I believe i have the encryption set correctly, and i have the AES enabled, but i am still seeing 54MB? i attached a cleansed config from my "sandbox" hoping that som...
Hi.i would like to have some help on configuring the wap 121 access point.Best regard.
Hello everybody,I have a problem with some access point: AIR-LAP1252A6-A-K9 version: 12.4I don’t have write de command:AP#debug lwapp console cliAP # lwapp ap ip address 192.168.1.100 255.255.255...
Hello everyone,I need to migrate from wlc 7.4 to Virtual wlc 8, and i have 2 doubts:first: if i download the config file from the 7.4 and then it is uploaded to the 8, this will run? or there is something else i should do.two: i need to install the...
We have 3 WLANs that I'm planning on reducing to 1, all are WPA2-PSK. I'm going to keep our voice WLAN since it has the most clients by far and enable MAC authentication on it, we're using ACS5.7 to do the MAC authentication.I've now enabled MAC auth...
Hello,We have a Cisco 5508 Wireless LAN Controller (version 7.4.121.0) which is currently supporting 32 access points (various different models). These access points are spread across many offices globally and all connect to the WLC through a site-to...
Hi all,In a mixed environment with different client type (apple iphone/ipad/xp/ms 7/ms 8), what is the best method for roaming on wlan with wpa2-aes (eap-tls) ? the controller work with 7.6.x release, in my opinion the best is the default method , OC...
My customer has one WLC with almost 15 APs.There are 2 SSIDs ( Staff and Guest) distributed in the 15 APs but now I would like to configure guest SSID only in 3 APs (not in all APs) and Staff SSID will broadcast in all APs.I will create a AP group...
Hi,Is there any fallback option for FlexConnect RADIUS NAC?I have centralized RADIUS NAC with dynamic VLAN assignment (i.e. users first assigned to quarantine VLAN for posture check, if passed they will be assigned to authorized access VLAN) for wire...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 08-14-2026 02:07 PM | ||
| 08-10-2026 11:32 AM | ||
| 08-06-2026 09:29 PM | ||
| 08-05-2026 05:58 AM | ||
| 07-15-2026 08:23 AM |