Wireless

We have a situation where our LAP have been installed so closely, that the "802.11a > RRM > Tx Power Control(TPC)" has set the power level to 7. Consequently there are rooms that cannot see a 5 GHz signal. Why can't I just up the power of all 40-odd ...

Hello,Is there any possibility to limit the bandwidth per SSID on Cisco Aironet 1100 that is connected to Cisco router 876?So the main goal is to have two SSID one for the guests and one for the colleagues and to limit for example half the bandwidth ...

I have a single stack of 3850 switches to which my APs are directly connected.My APs are registered and I have created 2 WLANs to which I can authenticate, associate and pickup an IP address just fine. VLAN 53 - Wireless APs (no WLAN configured) 10.3...

Hi,we have impelmented wifi solution over our network, we have used the option 82 to help in assigning IP addresses to the clients. the Setup is mainly as below,Cisco WLC 8500 --- NAS " Third party" --- AAA server. using RADIUS Protocol.we dont have ...

p { margin-bottom: 0.25cm; line-height: 120%; }a:link { } I have some problems with ISE Central Web Authentication deployementWhen the user associates to the web authentication SSID, and opens the browser, the WLC redirects to the guest portal, only ...

Hello all,Heard that Cisco has announced the end of life for 1262 series Access points. Can anyone suggest the best replacement  for this series of Access Points..

Hi,I have configured Cisco WLC 5508 with a wired guest lan and a custom web authentication, i have downloaded the web-auth bundle on wlc.  I receive the splash screen but when i insert the credential or logout i receive an undefined page. If i use in...

Hi, i would like to configure wired guest acces with wlc 5508 (release 7.6.130), but when i set Guest lan on interface (vlan wired) the system remove the ip address configuration. I don't understand what device should act as the default gateway. Who ...

Hi, im having several problems trying to upload my auth certificate to WLC. I tried upload to WLC but im having a error "ERROR INSTALLING CERTIFICATE"  I have seen this link. Which it seems interesting to me but i cant access.. can someone tell me ho...

hi,I have deployed a wireless network with a 5508 wireless lan controller with indoor and outdoor access points, the indoor ones are working fine but the 1552 outdoor ones are transmitting a very weak signal. when I check the advance features in the ...

I have a problem with our production wireless network where i see many clients (about 50 - 150) disconnecting very 60 Mins. On the WLC 8510 under msglog I see hundreds of following messages. Counldnt find any help on google. have any one encountered ...

Hi , I have Prime server, WLC and AP.I would like to know if one AP down and we replace the AP, how we know which AP group the AP is from.Can we see in Prime or WLC ? ThanksWin

HiI am looking for help on a requirement a customer has with Wireless Guest trafficWe have several large offices enabled with WiFi and at each office there are Cisco 2602 APs. These register to foreign WLAN Controllers in a Data Centre over WAN circu...

I have a big issue with my telemetry clients who are getting disconnected at random times.I have got MP2 en MX40 philips devices who are using multicast to talk to their multicast server.Anyone has got experience with this?