Hello,I understand that in order to send syslog messages from APs to a syslog server the syslog server needs to be defined in the AP join profile the APs are attached to. Is there a way to change the port number to something else other than the defa...
Forum Posts
Hi all, I have a AP 1852, I already change Cisco Mobility Express with the version: 8.10.196.0 . I have the network diagram: - When I connect the laptop or mobile device to SSID: AP_01, I can reach internet,... - When I connect the laptop to SSID: AP...
Hi,I have two C9120XI-B APs that are not able to join the EWC which is loaded on another C9120XI-B AP. here is the log I get on my APs. I have reset the APs and tried to load the image on them through Software Management tab on my controller but no s...
hi I'm setting up a wireless network with mac filtering, but I get this error. Dec 4 21:08:42.786: %SESSION_MGR-5-FAIL: Chassis 1 R0/0: wncd: Authorization failed or unapplied for client (b894.e7a0.8677) on Interface capwap_9000000d AuditSessionID ...
Resolved! Cisco 9120 AP Possible Corrupt Image
Good day,My Catalyst 9120 with embedded ewc is behaving strangely after a software update using the http desktop option.I tried updating my device to version 17.15.02, however after everything completed, i lost all communication with the device. coul...
I have a deployment where machine certificates are deployed and used for 802.1x authentication to an SSID. This machine certificate is created using the device's asset tag. For example asset001.mydomain.co.uk.Authentication to the SSID works fine. Bu...
Resolved! Clients Dashboard expected bahavior?
I have an SSID configured with 'Identity PSK without RADIUS' deploying Group Policies based on PSK, and that's all working hunky dory. However...in both the Old and New versions of the Clients dashboard, effected devices are displaying 'normal' under...
Good day,Does anybody use the cloud monitoring of the Catalyst 9800 Controllers?Our company uses this for a few month already. We have some positives and negatives about it. I'll list them below.PositivesMonitoring of Catalyst AP's in the Meraki Dash...
Resolved! Web auth pending in cisco wlc 9800
web auth pending in cisco wlc 9800
Resolved! Two WLCs by option 43?
Hello,I need to configure a switch to use two different models of APs wifi who connect to two different WLCs (because compatibility).I already have one model of AP who use the option 43 in switch DHCP pool to go the WLC.Now I need to use another mode...
Hi, I see these API details for Air Marshall:https://developer.cisco.com/meraki/api-v1/search/?q=roguesAPIs available listed below.I need a way to report on the different networks across the org, so:1- They have a list and can begin categorizing2- We...
Recently swapped our 3802i APs for all C9130AXI to get the WiFi 6 capability. Have noticed very poor performance overall. Only change has been with the APs, nothing else. The controller remained to be an AIR 3504 and the switch is a Catalyst 3850 UPo...
We have catalyst 9800 WLC and we have 9120 series ap`s which has already aironet firmware, when connected with new WLC after dicovering the controller when it sent the join request we are receiving CAPWAP State: DTLS Teardown message, following is t...
I am trying to implement the following topology with real devices: My devices are:WLC (5520 Series)Access Points (2600 Series) - LightweightSwitch (Catalyst 3750 X Series)I have ran the following configuration on the switch: interface g1/0/1switchpor...
