Wireless

Hi friends,i just need to get clear the douts about the features are not supporting in 7.0 codeThe features does not support in this integration are as follows:No support for guest clients – posture for guest user is not supported H-reap local switch...

HiI'm looking to implement QOS roles for my guest traffic. I have a guest WLan with web auth, but the QOS role option does not appear under the wireless menu.  Wireless > QOS > Qos Roles.   So far I have  tried it on 2504, 4402, and on a Virtual WLC ...

How to configure an APN that configured to load balance between 2 OCSHow to configure an APN that configured to use dominant mode between 2 OCS addressesHow to configure an APN that configured to select OCS address as instructed from an external enti...

Hi All,We have 5508 WLC with 7.4.100.60 Ios. and we have multiple Ap's in our network (3600,1131,1242) and integrated with 5508. We found on eissue recently i.e. all 1131 access points are rebooting every 5 to 6 hrs.Let me know waht is the issue and ...

Hi,Our wlan controller is located in HQ office and we have APs in branch office. Is it possible to implement two different SSIDs and they should be in two different vlans? So should we configure the AP trunk?REAP does not support IEEE 802.1Q VLAN tag...

Hi,    I want to start implementing a small indoor mesh network of 3 APs Aironet 1240(Currently in standalone mode) in order to grow afterward with more APs. Is there any way to configure those 3 APs in an indoor mesh configuration (for example, only...

Hi together,i've tried to set a 1242ag into bridge mode for checking the wireless-mesh function. After that switch the ap won't connect to the wlc anymore. Normally the AP should connect to the WLC as a RAP (AP with connection to the LAN) and providi...

Hello Experts,I have a question about Cisco Aironet 1310 AP, the problem I am getting is that I am unable to enter the conf t mode to configure the AP. I am not sure what could be the problem. I have IOS 12.3 running on it.Please help

This would seem like a simple configuration, but I just cannot get it working.  The previous administrator had used a Windows DHCP server for our guest WiFi, but I'd like to have the WLC handle it so Guest WiFi traffic never hits our Internal network...

May I know how can I enable 802.11ac on vWLC?WLC Software Version: 7.4.100.60AIR-CAP3602I-A-K9  Many Thanks!

Hi,I've recently installed a Cisco AP1552E and have got as far as it registering on the WLC2504 (V7.0.116). However, when I go to the Wireless --> General Tab its shows the AP Mode as Bridge. There are no options to change it to HREAP or anything els...