Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
Using autonomous APs, we often place an indoor AP behind a non-root bridge. I want to do the same with a 1552, but there is some working in the design guide which causes me concern..."It is not possible to connect a local, FlexConnect mode AP or a R...
Hi,May I know if there is a way to prevent users on other VLAN to access WLC GUI?ThanksSent from Cisco Technical Support iPhone App
Dear Team, Could you please advise, if Cisco 2602 Access Point supports IPS and CleanAir along with Access Point feature or does it need to work as standalone to have these functions enabled ? Regards, SID
Anyone ever seen this problem?not working 3600e(config-if)#power local ? <2 - 2> One of: 2 maximum Set power to allowed maximumInstead ofworking 3600e(config-if)#power local ? <2 - 23> One of: 23 20 17 14 11 8 5 2 maximum Set power to allowe...
Please help me how it is done.Scenario: 2 WLAN (Guest, Corporate (MAC Filtering Enabled)) 2 SSID (Guest, Corporate (MAC Filtering Enabled)) 2 DHCP Pool (1 for each WLAN) Requirements: Is it possible that the users from Cor...
hi,I want to guest see a web page when they click the internet.In this web page guest enter his name and his friend's mail adres who are working in our company.When guest click submit, an e-mail is sent to his friend to accept guest to our guest wire...
Hello All,Is it possible to configure Session time out under WLAN-> Advanced for L3 web authentication ..? Have anybody tested it works ..?
Hi All,I have 300 APs deployed and concurrent client associations that number 3000+ dailyat the moment I have a single subnet for all users, there is no authentication just a click throughpage with email entry to gain access.The APs are assigned to...
Does this above mentioned Wireless controller support :•- Port Based Access Control•- What is the Switching capacity speed•- What is the MAC Address table sizeRegards,Dravvy
How to customize the web page for the guest authentication in cisco wlc 5508 ..? and also is it possible for customizing the Lobby admin webpage too ..?
Hi! With what may be related to this error:*Jul 18 17:40:58.637: %DHCP-3-BAD_DHCP_PKT: dhcpd.c:235 Bad DHCP packet from 10.19.29.3, dropping*Jul 18 17:40:50.309: %DHCP-3-BAD_DHCP_PKT: dhcpd.c:235 Bad DHCP packet from 10.19.29.3, dropping*Jul 18 17:40...
Looking for some guidance on how to appropriately disable low data rates in our 2.4GHz environment. We would like to disable all b data rates and support only 12 Mbps and above. As I understand it I would configure my WLC data ra...
Hi,In all the configuration of the wism2 the configure the service port out of the allowed vlans of the trunk facing the wism2 card. i was wondering if I add this vlan to the trunk it should not have any diference since this vlan is for use on the wi...
does the 1200 aironet come with an antenna?
Hi all,We are using auto anchor mechanism for guest clients . Anchor controller placed after the Firewall. Guest vlan will be having reachabilty only to internet.We want to use ISE for web authentication.Since client subnet is not having reachbility...
