Wireless

All, I'm having issues streaming over my wireless network.  I have a need to stream some video over my wireless network from my QNAP Storage array running Twonky to a PS3.  The setup is this (all on the same subnet)QNAP NAS --rj45-- switch --rj45-- W...

Hello,My boss came to me today asking me why one of the phones he was using went into "Leaving Service Area".  He basically had to reboot the phone.Our infrastructure consists of over 1100 AP's.  These AP's are spread over 3 WLC 5508's running 7.0.22...

Hi ;   I tried PEAP machine and user authentication together with acs 5.3.  But if we are selecting only computer authentication in the client side , we are able to connect without even prompting for the username and password.Is there any way to enfo...

I have 2 WLC (5508), i configured the option for enable the high availability, but when the 2 WLC is working the mesh network is unstable, when only wlc is working the mesh is fine.

Does anyone knows how to setup a Cisco 1252 (or similar) with six omnidirectional antennas?I want to install three 15dBi antennas for the 2.4GHz radio and three 10dBi for the 5GHz.Is this configuration ok? It's not too much for the ap?Thanks in advan...

Can anyone please tell me how to configure Cisco 1252-AG-A-K9 Access Point Root and Repeater?Thanks,

I run Cisco WCS 6.0 on Linux. Does it support x86_64 or do I have to use 32 bit?

Can the Flex 7500 control the APs of the 1941w router?  I can't seem to find anything definitive on this but it seems odd that I wouldn't be able to control the LWAPP APs of that router when it is specifically designed for the small, remote branches ...

config ap primary-base controller_name Cisco_AP [controller_ip_address]Once you config a primary controller to an AP, it would be nice to undo that configuration so that an AP is no longer locked down to a specified list of controllers.Thank,Tony

HiI trying to customize the print out of the user and password for a guest acount but i cant find the rigth files to edit.What i like to do is to remove the pic and change fonts to match a smal printerAny hints ?RegardsMikael Mattsson

Buen dia,Tengo un cliente con un AP1252 con una sola antena AIR-ANT24120 (12 dBi Mast Mount Omnidirectional) Con Diversity desactivado y Rx Tx por una solo punto en el cual esta conectado la antena en 2.4Alguien a configurado este equipo para que tra...

Hola a todos,Este AP tiene dos conectores para colocarle una o  dos antenas de 2.4ghz con los que puedes hacer que una transmita y la otra reciba señal o que la que mayor señal reciba sea la que se utilice.Mi pregunta es, se puede poner a uno de los ...

Need to know if anyone else is having problems with the Cisco 1522 AP failing due to condensation? I see the enclosure is rated for NEMA type 4X and yet most other outdoor APs I use are rated IP65. The difference being the NEMA rating seems to only p...