Wireless

I've decided to try to use an existing WLAN and have it working with a new AP in H-REAP mode.-I've joined the AP to the remote controller, assigned it an IP, put it in H-REAP mode.-I chose a WLAN, enabled local switching.  On the controller, this WLA...

I'm new to this H-REAP configuration, but in the main office we have about 6 WLAN's.  I have a remote office which I want to have 2 new WLAN's and have them switched locally.  How can I only have the H-REAP AP's at this site only broadcast those 2 SS...

Hello everyone,If I have a cable modem with an Ethernet handoff and 5 public IPs can I put a wireless  bridge in place to get those public IPs over to another bridge that is connected to an ASA 5500 firewall?  I know I can get private IPs over but wh...

I have upgraded to the new release and the EM image version is N/A have tryed to upgrade the ER version to 5.2.157-ER. But the same status N/A exists after.

In WCS Client Alarm Summary Tag all related event types have 0 events. I know for a fact through syslog messages that I'm getting Client Association failures as well as authentication failures. Is this a WCS bug or I'm missing some WCS configuration?...

I have 2 WiSM in two 6509 with multiple WLAN SSID,aironet 1130 LAP , i use WLAN Override feature , but after a while the APs lose its WLAN Override configuration and i have to login to the WiSM again and check its SSID box again , the Software Versio...

Hi,i like to write client data (date, time, ip address, ...) to a syslog server. But the information is only collected in traps.How can i transmit this into syslog?WCS version 6.0.132.0 WLC version 6.0.182.0ThanksAndreas

Hi there,IÂ’ve got a problem hopefully someone can help me with. I have the above mentioned AP and it is configured, working well and providing wireless access to several laptops on our domain.The thing is I canÂ’t get access to the web-based interfa...

Hello,I would like to use the LAG feature on my 5508 WLCs and connect each of them to two different port of a 3750 stack using cross stack. Do you think it will work?Cisco suggests not to connect different LAG ports of a WLC to different CAT3750 but ...

Hi, has anybody seen the same issue previously:1. WiSM 5.2.193/AP1252/ACS5.0/WINDOWS7 laptop/EAP-TLS authentication for the WLAN2. Each time the client try to join the WLAN failed, there's no Radius authentication report for this failed connection in...

Hi, I am trying to use my AP with my cable modem. I have upgraded to the proper ios but am still running to a issue. Ideally, I want the AP connected to the cable modem and client would connect to the AP, get an IP and be able to surf the web. Righ...

Hi,Let me first come with my Wireless scenario. I have a L3 switch ->Firewall->L2 swith-> WAN Router-> I have WLC module in router. Now I have connected my LAP to L2 switch and LAP are able to register themselves with the controller. I have defined d...

40 locations, around 20-30 APs per location, 1 gig back from each site to the main site, minimizing cost. Trying to size the guest anchor controller. Redundancy is not required. As I understand correctly 4402/4404/5508 controller supports up to aroun...