Wireless

I am getting ready to upgrade all or our WiSM's and the WCS. Currently running 4.2.81 WCS and 4.2.112 WiSM. My question is, is there a preferred order as to which to upgrade first, the WiSM or the WCS?Seth

i configurd dhcp pool in the AP. Still its getting dhcp through the dhcp server located in the network . i want to use the dhcp pool inside the access point. did anyone come across this issue

hiwe have two controllers with 32 APs. Today all the APs associated to 1st controller got de-associated.Eventhough it did not associated to 2nd controller.Can someone advise me why this has happend and what are the required configurations needed to w...

My local VAR is suggesting we purchase two or more Cisco AP1131AG access points. We currently have a couple mixed brand wireless routers that each service a specific area of the building and broadcast a unique SSID for each device. We want to get mor...

I need to set-up a ip helpet statement in my WLC so the 7921 phones grab an IP address. The DHCP scope is on the router.Where do I point the helper statement to?

Hi, We recently purchased a few more 1131 APs for a remote office. For some reason, only one came as LWAPP AP, and the rests are all Autonomous APs. I have successfully upgraded one Auto AP into LWAPP, it is under control of that office's WLC. The im...

Hello,Are there any logs on the WLC that can capture the MAC,IP address and User Name of a client ?We want to send this information to a syslog serverWe have increased the logging level and We are looking for the information in our syslogs but it is ...

Hi,I have Access Point with IOS c1130-k9w7-tar.124-10b.JA3 and I am converting it to LWAPP when I try to convert it to LWAPP by using the LWAPP upgrade tool and image, the error comes that “AP does not have supported Radio”. I have checked that C...

Hi all,I have a Cisco 871W, but no experience .. My connection is 100/100 Mbit. And I have four PC's connected to the router. One in every connection. But now every PC gets about 25/25 Mbit. The router seems to split the speed. Even if only one PC ar...

Hi all,I need urgent help. I need to boot ourAP to rommon, but It doesnt accept break sequence Ctrl + break. I use putty as connection client to console port of AP.Any idea?BRjl

Anyone can clarify me if is correct or not to confifure the WISM controller on a 6509 management in VLAN1 or is a must to put ( as Cisco Described : http://www.cisco.com/en/US/docs/wireless/technology/wism/technical/reference/appnote.html#wp40841 ) i...

I have an issue where wireless coverage is very low, its so low you can easily something is wrong with AP transmit power. I looked up controller it shows transmit power level is 1. AP is Cisco 1130AG connected to HP 3500yl-48G..I observed on the swit...

Ok..perhaps I am a big dummy but I can't find any really good documentation on how to setup a 4400 in a DMZ for Wireless guest access. I know you wouldhave to setup mobility groups and make sure you can ping the controllers across thenetwork.. I am j...