Wireless

I plan to have our access points physically connected to the access switches which, in turn, connect to the Distro switches. Where should I install my WiSM modules? Distro or Core? I think it should be at the Core since "all wireless data traffic is ...

I need to know how to configure WPA on the access point. The GUI interface only lets you configure WEP

Can any one please help me how to recover deleted maps from wcs

Dear sirs,we are considering to track wi-fi devices in a industrial environment.Area is approssima 8000 mq and we have mounted 11 Access Point. We have used Cisco Aironet 1242 as Access Point and Cisco AIR-ANT1728 as antenna. Antenna are mounted at a...

Hi,My client requires I load a certificate on his 7921 phone with which the phone will authenticate to his radius server. Is this supported on the 7921, and any suggestions on what guide I can use.I have gone trough a couple but no luck.Thank you

I'm getting a number of decrypt errors. Like the one below. Does anyone know that causes this error.Decrypt error occurred for client '00:1d:e0:37:fd:57' using 'Unknown' key on '802.11b/g' interface of AP '00:1e:79:d6:72:10'.

I have a WiSM blade and about 25 LWAPP - all 1131s running 4.2.130. I do have 2 1252 APs and I want to limit the N access to only our management. We have tow SSIDs one is for guest access and it is using Web-Auth and the other is our Internal SSID wh...

I need assistance in selecting the right Wireless Router / DSL Modem (800-Series) for my business. Can someone help?

Hi all,I am seeing the logs filling up in our IAS server with repeated authentications for our users. It seems that people are re-authenticating about every 5 minutes. I have the WLAN setting set at 86400 seconds and unlimited in the IAS settings. I ...

Hi,We have a mesh implementation, the problem is this: it takes 3 - 4 hours for the MAP to register to the WLC. Has anyone experienced this before? Has anyone have an idea why it takes this long? By the way, This is just a point-to-point mesh network...

Hi I'm trying to set up EAP as the authentication method in an autonomous AP deployment. For this I need to define an radius server, but I don't have a specific radius server. I have an 1841 router with advanced security, can I use this as the radius...

Hi GuysI was wondering if anyone knows how to factory default the MSE or know of a way to enable the setup wizard again.Is there a way to check the status or change the WCS communication password manually.Thanks in advanced

I have 2 buildings with a different subnet each. I have to 4400's each with a different name but one keeps taking the other's AP's. I suspect it is because when the AP fires up it looks for that address in dns and because I have 2 buildings it has th...