Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
I have AP Groups enabled so when users connect to SSID 'X' in one building they get an IP address from one vlan, and when they connect to SSID 'X' in another building they get an IP address from another VLAN.The problem I am running into is that SSID...
Greetings all! I'm having troubles updating my 2106 bootloader from 4.0.191.0 to anything more current. Attached is a log from an update attempt. Any suggestions would be greatly apprecaited! Thanks in advance. -Sam(Cisco Controller)User: adminPasswo...
2710 Location appliance running 4.0.33.0, WCS running 4.2.130.2 Campus Network Designs each with multiple buildings and floors. One can be assigned to the location server and synchroization works perfectly. The second network design shows unassigned....
We currently have a campus with 4 WISM on 4 6509 .After a reload of one of these WISM, all the AP ( AIR-AP1231 ) disappear from this WISM :(WiSM-slot1-2) >show ap summaryNumber of APs.................................... 1Before the reload this WISM h...
Hi there,can anyone tell me how many concurrent client sessions are possible to a Aironet 1130AG AP?Thank you!
I have numerous 802.11b cards that will not see the wireless network but 802.11g see it fine. I have set it up per the directions to make the 1.0, 2.0, 5.5, and 11.0 as the basic rate. What else do I need to do? Thank you for your help.
I have an account to WLSE. But out of sudden, i cannot login. What could be the problem?Error: Forbidden PageYou have tried to access a page that you do not have permission for.Some common causes include:1. The user xxxx does not have a valid role.2....
Hi everyone,I have this situation:1250 Autonomous (latest IOS, clean config, set ssid, wpa2, channel width 40 MHz). When I send file by FTP I get this:Client => FTP 10-12 MiBFTP => Client 11-13 MiBBut after converting this AP to LAP and connecting to...
Is it possible to broadcast multiple SSIDs with an 1811W ISR? Everywhere I have searched I have found a reference to the "mbssid" command, however, it does not appear my IOS has that command. Does the 1811W support this and what IOS would be needed?
Hello, I have several branch offices (local) set up on 4400 WLC's serving local Wireless lan access. These controllers have a guest network set up that uses the mobility anchor for a controller set up in a DMZ at a data center.The guest access works ...
It took me a while to get this information, so thought I'd share. Here it is:************You cannot use the upgrade tool to do the IOS to LWAPP for the 1250 APs. Here is a method to do the conversion.*Method 1 : ( Mode Button )*1. Install an external...
Hi,I've a Cisco WLC running version 4.2, I've strange disconnections of some LWAPP access points.From the logs i can see the following message: Fri Oct 3 11:16:39 2008 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:1b:54:ec:db:e0 C...
Hello all! We have a several Cisco 4400 wireless controllers and a Cisco WLC, ACS server. Access points are Cisco LWAP 1242. Security is PEAP TKIP ms-chap. Machine authentication. Settings are pushed out through group policy. A new user can log on to...
I am thinking of upgrading my WISM to 5.1.151.0 for the multicast enhancement and other feathers. Has anyone had issues with this version.Is it stable?Thank YouPete
Greetings, we have been running a Cisco 2106 controller for awhile now, following a recent reboot two out of the four AP's failed to re-register with the following messages.Translating "CISCO-LWAPP-CONTROLLER.****************.local"...domain server (...
