Wireless

Hi all,I am having a WiSM blade installed in the next couple of weeks.Currently I have two 4404 controllers running version 4.1.171.0, and the WiSM will be installed with version 4.2.61.0.If I save the configuration from the controllers, will there b...

I would like to know what type of external antennas can i use with the AIR-AP1252AG-A-K9.Can I use one 12dBi (AIR-ANT24120) antenna in the 2.4Ghz Radio and one 6dBi (AIR-ANT5160V-R) for the 5Ghz radio?.thanks

has anyone found a planning tool for outside - City deployment planning, we need to do budget and location planning for upto 130 AP's... any thoughts / deign guidelines etc would be very approciated

Anyone ever have an issue with importing jpegs into WCS? I have tried the same drawing 4 times and it fails. I have the size down to under 12 Mb.

Please, help me.How much bandwidth i must reserved for transparent tranmission full e1 with NM-CEM-4TE1 via satellite channel, using max compression feature. TIA

(firmware 12.3JEB)I want to distinguish if an AP is in 802.11 a or b / g mode.I have tried to get specific information from AWCVX-MIB.my.For example i have tried to read AWCVX-MIB::awcDot11CurrentCarrierSet,AWCVX-MIB::awcDot11CurrentChannelobjects bu...

Hi, I am using a WLC 2006 at my HQ, and an Aironet 1030 LAP at Remote site via VPN (IPSEC)I am placing my LAP at my Remote site. It successfully registers with the WLC. But it keeps rebooting itself.What is the cause of this? This does not happen if ...

Hi,What kind of backup is done with the configuration Backup Task in the WCS Administration.Is this a backup of the actual running config on the WLC or is it the saved (startup) config on the controller?Is there a way to view/edit a configuration bac...

I have a high school that has a computer lab with 32 laptops. Also in the area are about 5 other teacher laptops. There are approximately 3 AP's in the vicinity within -72. The controller is running 4.0.179 using RRM. It seems that the computer lab i...

hallo,in a Basic Service Set the mobile Stations must exchange data throughout the AP.Before transmitting a Station must sense the medium by radio and NAV.Suppose we have 2 stations, sta1 and sta2 NON hidden each other.Suppose sta1 transmit a frame t...

I'm working on a large controller based wireless deployment this week and am trying to get WPA configured on one of the SSIDs. The problem I have is that they are using a Radiator radius authenticating against OpenLDAP, which is not exactly a support...

have any of you guys ever did an actual outdoor site survey for mesh. the client already purchased 20x1510's which will be used for voice. the initial site survey report we did was just based on the guidelines from Cisco. re: RAP-MAP (1.2km), MAP-MAP...

Hi,I'm in the process of testing wireless connectivity via a light weight WAP that communicates with the WISM module ( currently running 4.0.206.0). However i've noticed that the wireless client doesn't pick up an IP via DHCP although the IP helper a...

Hi, I was wandering if you already asked yourself about the nature of the wmm(802.11e) technique from the performance point of view and especially its relation to qos policing/shaping. The wmm normally is giving access with priority to voice /video a...