Wireless

Please provide link to Cisco's Wireless Control System's online demo.

hello experts!!!i'm trying to register a 1500 lap with the airespace 4101.. (is that even possible without the WCS?) but i am unable to get an ip address. i issued a debug command and found out that the lap is talking with the controller. but it is g...

Hi,we have a WLAN implementation of several AP's in a shopfloor area, and we were having some troubles. Has I red about overlapping rules, I went to the problematic areas and I could see in one location over 5 even 6 ap's. I asked the vendor that imp...

Hello, I am having trouble setting up windows workgroup over the wireless connection.All computers over the wireless connection can see each other but can't ping or access shared folder (network path not found)however the wirless connected pc's ...

Hi Members,Any news on a Cisco 5GHz Bridge (such as Aironet 1400 or equivalent) that is certified for use in the UK (IR 2007).Aparrently we can go up to 4W EIRP with IR2007 on 5GHz bridging, much better than 2.4GHz allowed power.I don't think I can u...

? want to use ACS to verify the (management) login to the WISMs. Does anyone know if this is possible. I can only find related ducumentation about WISM/ACS for wireless clients and not for the management loginin to the console/telnet/explorerGoen

I have an access point with a 100' low loss cable (CiscoAIR-CAB100ULL)connected to an Cisco AIR-ANT2506 5.2dB Gain Omni antenna. I can stand right next to the antenna and I see only a 1bar signal strength using Windows Zero Config tool. It seems o...

I have 3 - 1230 APs running 12.3(JA)2 that will not stop recycling. I've tried using the mode button to restore to factory defaults, but so far have been unsuccessful. Any ideas?

I am using Cisco 1231 ap's with ACS v3.3 and peap auth, the ACS server is using machine auth. also, and AD user database. Everything is working really well with PC's and even with the Macbooks if the password is typed correctly. The problem occurs wh...

Hi, Im looking for possibility to configure Cisco Access Points for PPPoE and VPDN anybody knows pls reply to pemasiri.d@mannai.com.qa tks

I need to configure our Cisco Aironet 1200's for multiple VLANs. VLAN101 is for public use & VLAN2 is for employees only. Existing config is attached.I need:1. To disable the broadcast of VLAN2's SSID so that only VLAN101 shows up in the SSID list ...

We recently had a nice sized installation of 1131 LWAPPS's (180) w/ WLC's and a WCS. The problem I'm having is out of the blue one day my Dell Latitude D400 w/ intell 2200BG internal wifi just disconnected and I wasn't able to reconnect. I've since...

I have alot of interference thresholds beening set off with the default 10%. I have a dense deployment and I am sure it is co channel interference. Does anyone have a recommendation what this threshold should be set at to point out "real" world issue...

The quick start guide for 4400 wlc states "Cisco recommends no more than 25 APs per port". As far as I know, the controller has one single AP manager interface mapped to one of the ports, which all APs must connect to. Using a 4402-50 wlc and layer 3...