Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Hi guys,I have a Aironet AP1100; the users should be authenticated throught the radius server in the EAP-TLS mode or in the open authentication mode.this is my configuration for the authentication in the ssid:! ssid AIR-TEST authentication open ...
How can i configer my AP 1200 to broadcast SSID on 5 diffrent VLAN's?I succeed to broadcast it only on native VLAN.
This may sound rather naive...however, in my pursuit to understand the PHY layer, if a Radio is transmitting at a frequency of 2.4GHz, then this means 2.4 billion sine waves per second. Hmmm...then how come you cannot place a bit on each sine wave a...
Hi all!Is there any way to configure the 1200 Ap not to change to Repeater mode when the Ethernet Connectivity lost.?
Is there a limit of the filtering entry for the Aironet 350 access point?I check almost all the 350 related docs, and can't find anything.regards,Karl
Resolved! Cabling/Connections
What extra loss is added if you interconnect a CAB020LL-R and a CAB050LL-R? Since these cables come with Male/Female TNC connectors. Can you not connect them tohgether to get a 70' foot cable?Bob
Whats the last supported BR500 firmware and how can I get it?Thanks in advance -Danny
I would like to set up some access points where customers can access the internet. The idea is to give wireless access to outside customers (each of them should have username and password) which has nothing to do with our corporate network. I have a...
I'm using many AP and BR in 2.4GHz for outdoor connections. I saw that the new product Aironet 1200 can be used with 5,7GHz frequency but it does not have a RF connector for an external antenna.Will it be available some day with RF connector ? (like ...
I'm using the AP1100 with multiple vlan's and ssid's. Vlan 1 is the native vlan (same as the switch connected to the AP1100). I don't have an SSID for Vlan1.When I do an active Site Survey with the ACU I get a constant incremental for "Lost to Sour...
I'm using many AP and BR in 2.4GHz for outdoor connections. I saw that the new product Aironet 1200 can be used with 5,7GHz frequency but it does not have a RF connector for an external antenna.Will it be available some day with RF connector ? (like ...
I want to track bandwidth usage per client. Is there a way to get an MRTG or other type report from the AP's?-Jay
Hello,Does anyone have ideas/examples on using SNMP to query 350 series bridges to obtain running data on signal strength & quality? I would like to use something like MRTG to monitor signal strength, along with link usage.Looking through the MIB fil...
Hello!I'm using Cisco 350 Series Aironet PCI Card in Linux for wireless communication. Till now didn't succed to make the card to work in Infrastructure Mode, just ad-hoc. Installing Linux RedHat 8.0 and using "iwconfig" command I saw that it is poss...
Can anyone tell me what kind of performance hit I would expect by enabling WEP on a point to point wireless link using 340 bridges?
