Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
I have an upgrade kit which upgrades the radio from 802.11b to 802.11g. Does anyone know if the power supply which came with the 1100 will support the new radio or should I get a power injector for the 1100? Thank you.
Anyone know if Cisco AP 1200 running Cisco IOS support the "Downloadable ACL's" via Cisco Access Control Server? I suppose they would since other IOS devices support this feature.
If I add an auto-manage template will WLSE apply the auto-template to APs that are already managed? I would like to avoid entering any matching criteria on the auto manage job because I want the auto-manage job to occur on all “newly” discovered APs....
Attempting to set up WPA on a test AP350 now running Version 12.3(2)JA. According to the doco at http://www.cisco.com/en/US/customer/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml This should be possible.However the ...
I'm attempting to upgrade the firmware to the latest version. I've downloaded the correct zip file and unzipped it. When unzipped the 'apparent' correct filename becomes c1200-k9w7-mx.123-2.ja. The zip file has that 'mx' in the middle as 'tar'When I ...
A recently purchased 1200AP shows a 350WGB as a repeater and not a bridge in the logs. Is this normal behaviour ? Also for a noobie like me, whats the difference between IOS and VXworks ?
I would like to know what typical throughputs that any of you have seen in a single point to point Wireless bridge network of under 2 miles. Cisco documentation states ~24Mbps. Thanks in advanceBrendan
Find a documentation, for configuring a AP1200 with Telnet session (port 23)All command for parameter SSID, WEP key...
Traps sent from WLSE are not populated with index information. Example - A reboot of an AP does intiate the trap but cannot determine the nature of the trap from trap info. I am using SilverCreek as my notification recepient. All pertinent dependant ...
HelloI would like to re-autenticate the LEAP WL-client using the radius-av-pair 23. But I can't see any re-autentication (no entry in the passend authentication) after the specified timeout.When I do a manuel re-autentication withhin the ACU than eve...
Dear AllTo fulfeel my custemer requirement I require a Set Top box /wi-fy which complaince following specificationsDSl/EthernetADSL,ADSL2Fourt 10/100 base T Ethernet SwitchDSL Router ProtocolsVoiceVoIP (MGCP, SYSTEM INTEGRATION)Video/Audio/GraphicsVi...
HiCould someone please confirm what the maximum number of interfaces is that I can configure on a PIX 525 UR license if I require 1 gigabit interface.In other words, with 1x Gig interface am I still able to support 7 Fastethernet interfaces.Thanks
hi everybody,may i ask the following question, i feel it is simple:1. is it right that access point is a L2 device and it can be mixed with router?2. for cisco aironet series, still there are no 100mbps throughput ?3. can any one tell me about 1300 a...
Does any know of any issues regarding Cisco 350 adapters communicating with Belkin AP's. The card hasn't created an association with the SSID The ACU troubleshooting indicates that the card and AP can communicate, but the SSID isn't correct, I've con...
I download the Cisco Wireless IP Phone 7920 Configuration Utility (http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser-crypto). And I tried to connect my USB cable to it and it did not recongize it. I am running WIndows XP. I noticed in the C7920US...
