Wireless

Am I correct when I read that only the AP-123x model of 1200 APs are h/w ready to support 802.11i/AES when approved? Upgrades or replacement will be required for other model 1200s?

This is the thing.I need to connect 150 PCs in a new building which is 25 mts away, those 150 are in the same floor.[How many AP's (aironet350) should I use for those 150? Considering that all those 150 could be in use at the same time.I cannot use w...

hellocan PCI 802.11b adapter (AIR-PCI352) be connected to AP1100.if yes, why is there only one ref, however with a/b/g adapters there is a reference for ETSI, FCC, ...does FCC support 100mW transmission power?thxs

Hi,I've installed 6 AP1200's in an apt building to provide everyone with internet access. Some of the users are complaining that the service goes on and off at peak times. I'm new to these Cisco APs but I don't think this should be happening especial...

I would like to install the wireless clients without the ACU. I was wondering if all the features of the wireless card still work like:Limit client powerLimit Link speedRadio managementMy thinking is that these features are in the firmware so if I am...

Hello , Does AIR-MP21G-A-K9 support 802.11b or is there any separate radio card for 802.11b.Thanks.

Hi,We have a 1230AP running 12.2(13)JA1 IOS.I am trying to define a Layer3/4 ACL entry as permit tcp any host 10.10.1.1 eq 23However I cannot find a way doing that through the Web Interface. I can add the entry using CLI though.However if I add this ...

I have a NT and 350 bridges with two remote points, they working fine, however, I need to implement as security as posible, is there a nice doc about that? or a nice Link? Thanks folksMartin

What is the total number of access points that can reside in a Wireless Domain? I have implemented the WLSE 2.5 and would love to take advantage of it but I have 200 access points deployed now with more to come. Before I put these in a wireless domai...

I see unusual drops in signal strength on PCM 352 cisco PC cards. A site survey shows very good SNR (20 db). The drops cause the WPA laptop client to disassociate. I have AP 1120B access points. What methods shd I use towards identifying the problem ...

Hi there , wonder does anyone come across above error message recorded in your AP logs ( as below ) b)Warning Failed to Send Packet on port "awc0" (error=0xffffffff) a) FATAL Failed to start driver for port "awc0" (errno=0x00000000) Clients have to r...

I cannot get my machine to authenticate when I turn on WPA or CCKM. Soon as I turn them off my machine authenticates. I am using ACU 6.2 with a pcmcia aironet 352 card, 1200 AP with IOS.I have tried about everything I can think of to get this to work...

Hi, I would appreciate if you could reply to my following WLAN questions:1. Can we use 802.11a and 802.11b simultaneously in any single AP 2. For one of my customers I would like to propose 1200 AP with simultaneous 802.11g + 802.11a support. I belie...

Because I had connected two Workgroup Bridge 350, one Bridge fail, and I want to supply it with an Access Point 1200, CAN Aironet 1200 work as Workgroup Bridge 350?Thanks for your help !!!

I'm in the process of buying a few units of Cisco A.P but what is the main differences between these 2 A.P beside 1120 is an integrated antenna.