Wireless

Iam interested see what practices you take against war driving on cisco WLAN devices. Not looking for answear as to what can be done to prevent unauthorized use of your AP, but what can be done to stop its detection with popular war driving tools. Wi...

Has anyone else had an issue with 1400 series rebooting?If so....will firmware fix this issue?I vaguely remember firmware upgrades to 350 series fixing spontaneous reboots from thr AP's

I have over 500 toshiba M1 Centrino laptop on my network and I have noticied that they almost all associate with APs on channel 1, even if they are righ beside a AP on another channel.They are sticking on the channel 1 AP(s) until the signal is compl...

Hi,I downloaded the current drivers for the wireless NIC from Dell. I'm using the configuration GUI that comes with it. I'm not getting very far when I try to connect to the AP.I am wondering if I have to use the Cisco Client to configure the NIC? ...

Hi,We are trying to implement Cisco 1230 AP's with Symbol 7946 terminals with Spectrum 24 WLAN cards in. We want to use 128 bit wep keys but we can not get the Symbol to connect to the AP. We can get any other devices IPAQ's, Cisco 350 PCMCIA cards a...

We have an AP1200 with IOS 12.2(8)JA with 802.11bWe have Compaq tablet PC's with inbuilt 802.11b wireless cards.We seems to hit a maximum when the tablets are associating with the access point (around 6 clients). If we turn a client off another can s...

Did someone have this problem before, my WLSE is giving me this error:Aironet AP 1210 Eth Port BVI1 Port is down P2But on the AP, the state of the port is up, I only have the problem on one AP BVI1 is up, line protocol is up Hardware is BVI, address...

After installing the recent ACU Windows XP wont start up. Gives an error cswgina.dll failed to load and only option is to restart. I have tried everything from safe mode to running Windows set up to repair windows. Did not select LEP since It is not ...

Is it possible to automatically backup the configuration on a Cisco Series 350 Wireless Bridge?I've written a script to do an snmpset to tftp of the running configs of routers and was wandering if something similar is achievable for wireless bridges....

hi,is it posible to implement simple user/pass radius authentication between a cisco 352 and a non-cisco pcmcia card (say a lucent card)?i just want this thing to use 802.1x-based eap authentication, but i have several non-cisco wireless cards. i rea...

I have Thinkpad T40 laptop with integrated Cisco 802.11b Wireless (MPCI)card. I'm able to connect to my company Wireless LAN and then to the Internet. When I take my laptop home and try to connect to my home wireless network I can see and access my o...

On AP350s with all datarates set to basic and good links to clients on 11Mbps, I still see a lot of unicast data being transmitted over 1Mbps. This varies from 10~50% on the APs I checked. The remainder of unicast data is allmost all transmitted over...

What is the purpose of CCKM (Cisco Centralized Key Management)? Is there a need to use it if you are using LEAP or PEAP of some other form of 802.1x?I've read all kinds of documents on Cisco's web site but I can't find anything that explains its pur...