Wireless

Hi, with the above WLAN Equipment installed, there are approx. twice a minute a link loss. But not with Labtops with the same PCM352 and WIN 2000 is installed. Has anybody a clue abaout this issue. Regards Richard

What is the OID for the ethernet port/radio port on the Ap 350/1200 or 340.How can i find it using snmpwalk or snmpget ?

I recently depolyed two labs each lab has 2 1200 access points set up as roots and 30 pcs. I have the power set to 30mw on each access point. The problem I am having is when students log in in these classrooms at the same time it takes about 6-8 minu...

I have two Aironet 340 Point Access and I want connect two wired LAN that are in different buildings.I have configurated: -> 1 acces point / root -> 1 client / non-rootThe "association menu" say: The client is associated with the access point, but th...

Just wondering if you can distribute WEP keys to AP's without going to each AP.

I am configuring a number of Cisco AP 350s for Cisco LEAP. If "Rotate Broadcast Key" is enabled, is it necessary to enter a static WEP key to be used to encrypt broadcast/multicast packets? If Cisco LEAP only is required (Network EAP is enabled as an...

Hi. Can anyone tell me if a Cisco Aironet 340 Bridge (BR342) acting as an access point will support LEAP. Does the client have to support it? Or does the access point have to support it? Or both? If Windows XP supports it, does a 340 client adapter h...

Does anyone know if the 350 Work Group Bridge has any limitation on protocols it supports and can pass. Trying to get Novell clients to pass through a WGB to an access point that sites on the Network whrere ther servers reside.-pat

I was curious to see if anyone has ever heard of this error message, TAP Terminate. It is an ASCII text message that is being generated on several of our RF Scanning Guns. The guns are connected to the network via RF AP using IEEE802.11 technology. S...

We are designing a wireless infraestructure and we are now thinking about security. We have 350 Series Lan Adapters in clients, 350 Series in Access Points, and two ACS 3.1 for authentication. We have read a lot about WEP keys, LEAP, etc, and we are ...

I'm trying to get MobileIP working on a 2621 router. I've had some succes, but it doesn't work right just yet. I can get the MN to move from its home network into a foreign network just fine, but then the MN won't move back into its home network afte...

We have a number of wireless clients (running WINNT 4.0) all with Avaya PCMCIA cards connecting to a pure Cisco environment:8 x Catalyst 3550-24 switches with 1000BaseSX uplinks connecting each throughout a warehouse environment. (Spanning tree is di...

Does anyone know if it is possible to use the card out of a PCI352 in a normal laptop slot? I pulled the card out, and it appears to not work when I insert it into the PCMCIA slot. It there a firmware flash that I can do, or am I just out of luck...

I have a 350 Bridge setup as a client that keeps reporting "Lost Authentication with Parent". When this happens is de-associates from the root bridge and conectivity is lost. It then reassociates with the root and goes on. The root bridge logs that i...

Hi! I´d like to install a WLAN in a building with several floors. At each floor I want to Install one Aironet 1200 AP. Does every AP need a other channel or must I use the same channel on each AP for roaming? Any help would be appreciated! Thank you,...