Wireless

We have aironet 1200 APs. We use 11.42T firmwareIn the following configuration, we don' t have radio link:AP/root <------ Site Survey ClientHas anybody idea about this situation......The Antennas are good because it works in the AP/root <----- Repeat...

Currently : Using Static WEP Goal: Provide technology that is both moderately simple to implement and more secure than Static WEP.I have all Cisco APs. 20 Cisco LAN adapters using LEAP dynamic WEP. I will add 10 hand held devices plus 300 laptops usi...

Hallo,I have the following problem :I try to connect an iPAQ 3870 (with Pocket PC2002) and an Aironet PC4800 PCCard to our WLAN (AP4800 with FW V7.66).I use the actual driver 2.20.05 from your download page .But I got no association.Using the same PC...

I am having problem on setting up the repeater part

I understand that there is a provision to provide an ip addr, subnet mask, default gateway and static routes in a 350 wireless bridge..But are these options provided for routing between it's ports or are they only for ip connectivity to the bridge???...

Hi, Im from the philippines. If I want to buy a wireless bridge, what part # should I choose? is it AIR-BR350-A-K9 ?thanks for the help

We're starting to use repeaters (using 350APs) more in our WLAN infrastructure.On testing firmware upgrades locally within my WLAN lab that contains 2 root APs and 2 repeaters (all the same SSID / WEP settings) when you upgrade the firmware to the re...

Good Day, Would you please inform how to prevent multiple logons with the Cisco ACS server 3.0 for Aironet 350 environment? Although the option "Sessions available to user" = 1 is configured in both group and user settings on the ACS server, however ...

Hi I have a number of BR340 that power on and they stay up for approx. 30 - 120 seconds then die, and after another 30 seconds they power on again and start the cycle over.They are all using external power supplies. We have installed 15 on this site ...

Overall, the Dynamic LEAP 128-Bit RC4 encryption is just as strong as the static 3DES key, if not stronger. However since LEAP iss not FIPS complaint, we must use 3DES VPN through the WLAN in US government and DoD. Is there any push to certify LEAP o...

Is it safe and recommended to enable portfast on the switch ports that an AP or a wireless bridge is connected ?

Hi,In the cisco aironet 1200 product specs, the range for 11b is 40m@11mbps. How about 11a?

Hi,I'm wondering about the many different EAP authentication protocols. One of these is EAP/SIM (initiated by Nokia). I think the advantage of this authentication method might be the kind of key exchange. Users are familiar in using SIM-cards. Out of...

What is the maximum and minimum spacing that should be used for dual antennas on the cisco 350 Access Point.

Hello ,I have few access points setup .I have static ip address assigned to them.But the client adapter are not able to get the ip address from the DHCP server.client cards are not Cisco adapter.Some times the client cards picks up an ip address .The...