Wireless

i have a client that wants to extend wireless in to a campus like setting.The buildings are 50 to 150ft apart,with good line of site between them.There is a main building where all the telephone services go to.There is also other power sources betwee...

I'm researching as to which method will be preferable for our "internal" wireless deployment.I'm trying to create a brief "Pros and Cons" for each methodVPN = IPSEC tunnelICA =128 bit encryption.any thoughts

when I uninstall the RME,the package CSCOswim and CSCOncfa can't be uninstalled,the related messages is :"INFO: Tue May 14 10:46:35 CST 2002 : now removing CSCOswim...The following package is currently installed: CSCOswim Software Image Manager (spar...

Hi, during the exam for Wireless Specialization I got the following question "What is the minimal acceptable Signal to Noise Ratio when surveying at 11Mbps?" Can someone provide me with the answer, I tell me this is the answer?I' ve got four possibil...

Anyone from the Wireless BU out there????The lightening arrestor with grounding ring will not fit when the bridge is mounted against the wall.Makes for a sloppy install. This has proved to be a real problem.Is this going to be changed anytime soon ??...

I need info on the security issues and solutions for a building to building wireless wan using Cisco 350 Wireless Bridges. Everything I'm finding on the subject is for WLAN applications.

I'm trying to add an Aironet 350 PC card to an existing Linksys WLAN. I've configured the WLAN for WEP-disabled, open access. I've set all the parameters on the 350 to match a working Linksys card. I've disabled MAC control on the Linksys Access Poin...

am going to use BBSM server, Aironet 350 APs and wireless clients, and RADIUS server. And I want to configure all authentication, authorization and accounting through Cisco ACS server.Question: Is it possible to configure this whole infrastructure in...

Hi!Maybe somebody can describe me why in ACL You are able to specify IGMP code only up to 15 while the number for Leave message is 0x17 (RFC2236)? Host report is not 2, and host query is not 1 in original packets but it is in ACL. I've dig all over t...

If one person is using Cisco Aeronet wireless LAN adapter card, then he/she is back to his/her desktop there is no coverage, can he/she then just disable he Aeronet LAN card and then use the ordinray LAN card which is connected to the network port. I...

Is there a recommended minimum operating margin?? If so where would I find the docs. 350 and 340 series bridges.

I'm considering use of 350 access points connected to Catalyst 4000 switches with a few Symbol phones & Call Manager. There may also be some (few) wireless PC cards also connecting thru the same APs. On my wired network, the phones, gateways, etc are...

What would be the recommended advice for deploying WLAN at enterprise scales today? Taking into consideration the following:Security: VPN over wireless or EAPEAP: EAP-TLS, LEAP or other variation of EAPRadio: Stick with 2.4Ghz or wait for 5Ghz produc...

While working with AP340 and 352 PCMCIA card, I found that I can't get the IP address through DHCP if I use WEP. Then I started checking the statistics in ACU. The value of PLCP CRC ERRORS is accumulating on the fly...After that, I tried to update th...

I am getting ready to extend my office LAN out to my home LAN using Cisco 342 Bridges and Dish antennas. The distance between the two locations is about 6 miles and has good line of sight. The dish at my home office will be mounted on the roof of my ...