Good Day, Have a Mikrotik Bridge (AP) connected to the client's WLC. (Static Bridge IP & PSK Configured On Mikrotik) Printer connects via Ethernet to Bridge (Static IP on Printer) Looking to replace the Mikrotik's with Cisco equivalent(s) Asking for ...
How does everyone do their AP / RF grouping for large corporate buildings? Do you do by floor? By wing? etc.
Hi Team, i like to change the AP Mode from CAPWAP to eWLC on 9105w to perform a Site Survey. I upgraded and converted in every known fashion, following the Guides, but the command "ap-type ewc..." is still not available, in no . Now the AP is associa...
Hi all,we have 2x WLC 9800 physical/virtual in HA and notice occasionally switch to/from WLC1 to WLC2, which causes short connection interruption while all APs go to the other WLC.we did upgrade to 17.3.4c from 17.3.2a - same issueios same on both WL...
Hi,Our deployment is currently composed by:- Catalyst 9800-40 release Amsterdam 17.3.3 (upgrade performed from the default version 16.12.02s) - Access Point 9120AXWe are not allowed to configure the helper address on the Gateway (Firewall Checkpoint)...
Hi Gentsi have 17.3.3 C9800 + Nx flexconnect-mode C9120AXI-E APs deployment with couple of locally switched SSIDs set for their clients AAA up against ISE. Everything works as expected with exception: APs send accounting requests to ISE for their cli...
Hi,Can you help me with this issue:It is required to configure an external dhcp in the Anchor controller for wireless guest users. The Anchor controller is in the DMZ and the external server is on the internal network. Can someone tell me how to conf...
There is a user in my company that is receiving constant lockout, after investigating there is a device that is using his username to try and authenticate but wrong password to our wireless meraki. We can not locate the device we only have the MAC th...
Hi all! I am thinking of getting a Cisco Aironet 1830 for my small home-lab (is the smallest that I've read that supports Cisco Mobility Express and its compatible with the WLC9800-CL), my purpose is just to learn how to setup and deploy this techno...
I am trying to take the list of AP's of WLC cisco device. I got below oid from the document. But these oid list only the AP's are UP. So when we get the list the AP's which are down are not shown in the list using the below oid. Is there any oid whic...
I fill up login details but shows the invalid username and password.what should I do
Hi all,I have an issue with WLC 5508 as below:Diargram:WLC 5508 ----- Cisco 9300 ------- Cisco APs (Trunking vs natvie vlan 155 for management)WLC and APs is using OS 8.5.135.0 We have 3 vlan: 155.0/24 (management) to configure IP management for WLC ...
We have cisco 2504 controller and user facing slowness and disconnection issue on frequent basis. We are these logs on controller :- *emWeb: Feb 10 17:50:06.309: %AAA-5-AAA_AUTH_ADMIN_USER: aaa.c:2739 Authentication succeeded for admin user 'HCL' on...
I am fumbling with the understanding of Wi-Fi channel configurations with multiple nodes in a mesh network. 1. Is it a best practice for each mesh node to utilize a different channel for home device access? For example, I have 3 mesh nodes in my hom...
Hi we have WLC 3504/v8.5.140 and ap3802. After user change to WIFI 6 card, there is connection issue. Its very easy to disconnect to wifi. Does this ios support it? Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM | ||
| 08-10-2026 11:32 AM | ||
| 08-06-2026 09:29 PM |
| User | Count |
|---|---|
| 4 | |
| 4 | |
| 1 | |
| 1 | |
| 1 |
